Adjusting The Volume; Monitor Angle Control - Kenwood DNX775RVS Instruction Manual

Basic Operations
Calendar/clock settings
1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [SETUP].
h SETUP Menu screen appears. h
3
Touch [User Interface].
h User Interface screen appears. h
4
Set each item as follows.
Scroll the page to show the item.
■ [Clock]
[NAV-SYNC ](Default): Synchronizes the clock
time with navigation GPS data.
[Manual]: Sets the clock manually.
[Time Zone]
■
If you have selected [Manual] for Clock,
select the time zone.
[Clock Adjust]
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.70)
NOTE
• Please set the date and time. If it is not set, it may
not work with some functions.
10

Adjusting the volume

To adjust the volume (0 to 40),
Press [R] to increase, and press [S] to decrease.
Holding [R] increases the volume continuously
to level 15.

Monitor Angle Control

You can adjust the position of the monitor.
1
Press the [G] button.
h Angle Adjust screen appears. h
2
Select a below number that represents
your desired angle setting.
Default is "0".
[Off Position]
■
You can store the current monitor angle as
the angle during power off. Touch [Memory]
when the desired angle is selected.