Volvo 9700 Manual page 45

Symbol Meaning
Retarder, position A
Retarder, position 1
Retarder, position 2
Retarder, position 3
Retarder, position B
Coolant, high temperature
Coolant, low level
Display control
There are four functions used to navigate
in the menus.
1 ESC
Acknowledge messages
Cancel
Return to previous menu/main menu
2 MENU
Select or confirm selected option
Reset data
Go from a menu to a submenu
3 ▲
Navigate upwards
Change set values
Increase background lighting in the
display
4 ▼
Navigate downwards
Change set values
Decrease background lighting in the
display
Menu
The driver information display provides
information about measurement values,
levels and status about the bus. The
driver can make personal settings.
For safety reasons, not all menus are
available while driving. Some menus and
settings only function when the bus is
stationary. Other menus require
password.
Main menu
When the bus is started, the main menu
appears. It is divided into two areas:
1 Drive mode
Menu is shown when the bus is
driven
2 Not in drive mode
Menu shown when bus is stationary
Menu gauge
Voltmeter
If the battery voltage drops below 18 V
while the engine is running, the display
will enter standby.
If the voltage is over 31 V, a warning is
displayed.
Route selection menu
When the bus is started the message
Select route appears. To navigate in the
menu, use the up and down buttons.
No route
If a route is not selected and cancelled
with the ESC button, a message is
shown that no route is selected.
The message is displayed repeatedly
until a route is selected.
If the No Data message is shown, there
is a system error.
Display
39