Table of Contents
Advertisement
Quick Links
Important Information
Network Camera
WV-S2550L
Model No.
WV-S2550L
* For information about the installation tasks, refer to the provided Installation
Guide. For information about how to perform the settings and how to
operate the camera, refer to the Operating Instructions on the following
Panasonic support web site.
https://security.panasonic.com/download/
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Advertisement
Table of Contents
Related Manuals for Panasonic WV-S2550L
Summary of Contents for Panasonic WV-S2550L
- Page 1 * For information about the installation tasks, refer to the provided Installation Guide. For information about how to perform the settings and how to operate the camera, refer to the Operating Instructions on the following Panasonic support web site. https://security.panasonic.com/download/ Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
-
Page 2: Table Of Contents
Contents Limitation of liability ........................3 Disclaimer of warranty ........................3 Preface ............................4 Main functions ..........................4 About the user manuals ........................ 6 System requirements for a PC ...................... 6 Trademarks and registered trademarks..................7 Copyright ............................7 Open Source Software ........................8 Network security ........................... -
Page 3: Limitation Of Liability
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:... -
Page 4: Preface
This allows H.265 compression in addition to conventional H.264 compression technology, and when combined with Smart Coding, reduces data load compared to our previous models. Panasonic's own intelligent auto (iA) feature provides increased discernibility even in environments with poor visibility... - Page 5 *2 For further information about Extension Software refer to our website (https://security.panasonic.com/support/info/ <Control No.: C0103>). Refer to page 6 about "<Control No.: C****>". *3 The rain wash coating is only effective against water (rain water) and is not effective against other substances such as oil or damage to the dome cover.
-
Page 6: About The User Manuals
Precautions for installation, Parts and functions, etc.. • Installation Guide: Explains installation, mounting, cable connections, and adjusting the field of view. • Operating Instructions (on the Panasonic support web site): Explains how to perform the settings and how to operate this camera. Note: •... -
Page 7: Trademarks And Registered Trademarks
IMPORTANT: • For information on the operation verification of the supported operating systems and web browsers, refer to our website at https://security.panasonic.com/support/info/ <Control No.: C0104>. • When using a PC that does not meet the above requirements, displaying of images may become slower or the web browser may become inoperable. -
Page 8: Open Source Software
• Refer to the “readme.txt” file on the provided CD-ROM for further information about open source software licenses and the source code. • Please note that Panasonic shall not respond to any inquiries regarding the contents of the source code. -
Page 9: Precautions
Precautions Do not insert any foreign objects. Do not sprinkle more water, exceeding the Fire or electrical shock may be caused if water performance limit of waterproof with a or any foreign objects, such as metal objects, high pressure cleaning machine, etc. enter inside the unit. - Page 10 In addition, short circuit or wrong wiring Refer to the Operating Instructions on the may cause fire. Panasonic support web site for information about how to change passwords. Install this product in a location high enough to avoid people and objects from To keep on using with stable performance bumping the product.
- Page 11 When an error is detected, this product What to do if “WARMING UP-PLEASE will restart automatically. WAIT” appears on the display. This product will be inoperable for around 2 This message indicates that the temperature minutes after the restart just as when the inside the camera has become extremely low.
- Page 12 Cleaning of the dome cover Meaning of symbols Use lens cleaning paper (used to clean camera : Direct current symbol or spectacles lenses) to remove any dirt on the dome cover. (If dust or the like is adhered at this time, the dome cover may get scratched. We recommend rinsing for stubborn stains.) The mark of light-shielding parts left inside the dome or dirt on the dorm cover may influence...
-
Page 13: Precautions For Installation
Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. For information about the installation tasks, refer to the provided Installation Guide. In order to prevent injury, the product... - Page 14 (reflected light) Refer to the Operating Instructions on the or reflections of surroundings on the camera Panasonic support web site for further informa- lens (ghost) may sometimes appear on the tion about the port forwarding function.
-
Page 15: Parts And Functions
• FRONT must positioned Waterproof rubber in front of the camera (on the Panasonic logo side). SD slot *1 Depending on the scanning application used, the Data Matrix may not be able to be read correctly. In this case, access the site by directly entering the following URL. - Page 16 ■ Cables cable (category 5e Ethernet or better, straight) RJ45 Network cable 4P alarm cable Alarm I/O cable (accessory) 12 V DC (red) 2P power Power supply GND (black) cable terminal (12 V DC) (accessory) Audio input cable (white) WV-S2550LN Audio output cable (black) MONITOR OUT terminal (factory shipment: NTSC monitor)
- Page 17 The monitor out is set to NTSC in the default settings of the camera. If you want to change the monitor out setting to PAL, refer to the Operating Instructions on the Panasonic support web site. *1 MONITOR OUT terminal (factory shipment: NTSC monitor)
- Page 18 Off, input, and output of the EXT I/O terminal 2 and 3 can be switched by configuring the setting. Refer to the Operating Instructions on the Panasonic support web site for further information about the EXT I/O terminal 2 and 3 (ALARM IN2, 3) settings ("Off", "Alarm input", "Alarm output"...
- Page 19 When connecting to a network using a PoE hub Before starting the installation, check the entire system configuration. The following illustration gives a wiring example of how to connect the camera to the network via a PoE device (hub). Powered speaker Adjustment monitor PoE device (hub) Ethernet cable...
- Page 20 ■ Indicators and buttons INITIAL SET button (Initializing / NTSC ⇔ PAL switch button) SD memory card warning/error indicator ACT indicator LINK indicator SD MOUNT indicator SD ERROR/AF indicator WIDE button TELE button AF button SD slot SD ON/OFF button INITIAL SET button (Initializing / NTSC ⇔ PAL switch button) Follow the steps below to initialize the network camera.
- Page 21 Lighting/blinking LED can be turned off with the software settings at any time. (The initial state is lighting or blinking.) Set the LED to be solid off if necessary, depending on the installation condi- tions. (☞ Operating instructions on the Panasonic support web site) SD memory card warning/error indicator ...
-
Page 22: Insert/Remove An Sd Memory Card
Insert / remove an SD memory card Note: Refer to the Operating Instructions on the Panasonic support web site for further information about the SD memory card settings. ■ Insert an SD memory card 【１】 Remove the enclosure from the camera, insert an SD memory card fully into the SD slot until a click is heard. - Page 23 If an unformatted SD memory card or an SD memory card formatted with other devices is used, this product may not work properly or performance deteri- oration may be caused. Refer to the Operating Instructions on the Panasonic support web site for how to format an SD memory card.
-
Page 24: Troubleshooting
Use an SD memory card formatted on the camera. Or install the software to format the SD memory card on the PC. Refer to our website (https://security.panasonic.com/support/info/ <Control No.: C0105>) for further information about the supported software. • Isn't the inserted SD memory card faulty? - Page 25 The focus can not be (on the • When the subject or location is extremely bright or able to be automati- reflective Panasonic cally adjusted. • When viewing through windows support web • When the dome cover is in a locations where it can...
-
Page 26: Specifications
Specifications Basic • Power source * DC 12 V PoE (IEEE802.3af compliant) Power consumption * DC 12 V : 840 mA/Approx. 10.2 W PoE DC 48 V : 220 mA/Approx. 10.6 W (Class 0 device) Operating environment Ambient operating temperature: –40 °C to +60 °C * {–40 °F to 140 °F} (Power On range: –30 °C to +60 °C {–22 °F to 140 °F}) - Page 27 *3 The audio output can be switched to the monitor output. Refer to the Operating Instructions on the Panasonic support web site for descriptions of how to switch the output. *4 Only when installation work is properly performed according to the Installation Guide and appro- priate waterproof treatment is performed.
- Page 28 Maximum shutter: Max.1/4000s, Max.1/2000s, Max.1/1000s, Max.1/500s, Max.1/250s, Max.1/120s, Max.1/100s, Max.2/120s, Max.2/100s, Max.3/120s, Max.1/30s, Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.16/30s Color/BW: Off/ On(IR Light Off)/ On(IR Light On)/ Auto1(IR Light Off)/ Auto2(IR Light On)/ Auto3(SCC) IR LED Light: High Middle Maximum irradiation distance : 40 m {Approx.
- Page 29 • Network Network: 10BASE-T/100BASE-TX, RJ45 connector [16:9 mode] Resolution * H.265/ H.264 3072×1728 * , 2560×1440, 1920×1080, 1280×720, 640×360, JPEG (MJPEG) 320×180 [4:3 mode] 3072×2304 * , 2560×1920, 1280×960, 800×600, VGA, 400×300, QVGA Image compression method * H.265/ H.264 Transmission priority: Constant bit rate / VBR / Frame rate / Best effort Frame rate: 1 fps/ 3 fps/ 5 fps*/ 7.5 fps*/ 10 fps*/ 12 fps*/ 15 fps*/ 20 fps*/...
- Page 30 Microsoft Windows or Windows Internet Explorer, click “Manual” - “Open” from the supplied CD-ROM and refer to “Notes on Windows / Internet Explorer versions”. *6 Refer to our website (https://security.panasonic.com/support/info/ <Control No.: C0107>) for latest information about the compatible SD memory cards.
-
Page 31: Optional Accessories
Optional accessories Ceiling mount bracket : WV-Q105A * Ceiling mount bracket : WV-Q169A Sun shade : WV-Q7118 <Dome covers> Dome cover : WV-CW7S (Smoke type) Dome cover : WV-CW7SN (Smoke type with clear sight coating) Dome cover : WV-CW7CN (Clear type with clear sight coating) <Light gray brackets>... - Page 32 For U.S. and Canada: For Europe and other countries: Panasonic Corporation of North America Panasonic Corporation Two Riverfront Plaza, Newark, NJ 07102-5490 http://www.panasonic.com http://business.panasonic.com/ Panasonic Canada Inc. Panasonic Corporation Osaka, Japan 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada 1-877-495-0580 Authorised Representative in EU: https://www.panasonic.com/ca/...
Need help?
Do you have a question about the WV-S2550L and is the answer not in the manual?
Questions and answers