Advertisement
PC Connectivity
Opto-isolated USB
Dimensions
185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4")
Weight
400 g (14.2 oz)
Environment
0 to 50 °C (32 to 122 °F) max. RH 100% IP 67
INITIAL PREPARATION
The instrument is supplied complete with batteries. See Batteries Replacement for details, page 65.
To prepare the instrument for field measurements close the serial communication socket with proper
stopper (to ensure waterproof protection).
Connect the EC probe to the DIN connector on the top of the instrument. Tighten the thread ring. Make
sure the probe sleeve is properly inserted.
Turn the instrument ON by pressing ON/OFF key.
At start-up the display will show the Hanna Instruments logo for a few seconds followed by the
percentage indication of the remaining battery life and the "Loading Log..." message, then enters
the measurement mode.
11
Advertisement
