Set Up / 'Menu; Information; Operating Mode; Settings - ProMinent Sigma 1 S1Cb Operating Instructions Manual

'Menu'
9 Set up /

'Information'

9.1

'Operating mode'

9.2

'Settings'

9.3
Please also refer to all overviews covering "Oper‐
–
ating/set up overview" and "Operating menu for
Sigma X Control type, complete" in the appendix
and the "Overview of equipment" and "Control ele‐
ments" chapters.
The pump exits the menu and returns to a contin‐
–
uous display if
pressed for 60 seconds.
The 'Menu' is sub-divided as follows:
'Information'
1 -
'Operating mode'
2 -
'Settings'
3 -
'Timer'
4 -
'Service'
5 -
'Language'
6 -
'Menu / Information è ...'
You can find out different information about your pump in the
menu. The number and type can depend on the pump settings.
'Menu / Information è Operating mode è ...'
You can switch between the operating modes in the
menu. You can enter the settings for this in the
'Manual'
n
'Batch'
n
'Contact'
n
'Analog'
n
'Menu / Information è Settings è ...'
Set up /
[Menu] is pressed or no key is
'Information'
'Operating mode'
'Settings' menu.
'Menu'
45