Firmware Upgrade; Troubleshooting; Intercom Failure; Intercom Reconnection - SCHUBERTH SC10U User Manual

16 FIRMWARE UPGRADE

The SC10U supports firmware upgrades. You can update the firmware
using the Device Manager (please refer to section 4.6.1, "Device
Manager" ). Please visit oem.sena.com/schuberth/ to check the
latest software downloads.

17 TROUBLESHOOTING

17.1 Intercom Failure

When you try to start an intercom conversation with an intercom friend
who is unavailable within range or already having a conference intercom
with other riders or a mobile phone call, you will hear a low tone double
beep signifying an intercom busy signal. In this case, you have to try
again later.

17.2 Intercom Reconnection

If your intercom friend goes out of range while having an intercom
conversation, you may hear static noise and eventually the intercom will
be disconnected. In this case, the SC10U automatically tries to
reconnect the intercom every 8 seconds and you will hear high tone
double beeps until the intercom is reestablished. If you do not want to
make a reconnection, press and hold the (-) Button for 1 second to stop
the attempt.
SC10U
41