Wheels & Tyres Maintenance - Sunrise Medical Quickie Q300 M Mini Instructions For Use Manual
Hide thumbs
Also See for Quickie Q300 M Mini:
- Owner's manual (28 pages) ,
- Manual (28 pages) ,
- Instructions for use manual (138 pages)
Table of Contents
Advertisement
Daily check routine as described in chapter 5.1
Weekly check routine as described in chapter 8.1
Clean wheelchair upholstery & Seating system
Complete inspection, safety check and service should be made by a Sunrise Medical
authorised dealer.
8.3 Wheels & tyres maintenance
To ensure that your wheelchair functions properly, it is essential that the tires are kept at the correct pressure. The correct tyre
pressure is indicated on the side of the tyre.
Tyres that are too soft will have a negative effect on the wheelchair's performance. Moving the wheelchair will require more energy,
making more demands on the batteries. Furthermore, wear on under inflated tyres is increased
When inspecting the tyres for signs of wear, look for significant scuff marks, cuts and a diminished tyre tread. Tyres will need to be
changed when the tread cannot be seen over the complete surface of the tyre.
Castor wheel
7"
Drive wheel
12"
13" (2.50-8)
14" (3.00-8)
DANGER!
• Do not inflate beyond the maximum allowed tyre pressure.
• Never use a forecourt pump
• Before tyres are repaired they must first be fully deflated!
38
Maintenance & Inspection Schedule
Max. tyre pressure
Solid tyre only
Max. tyre pressure
Solid tyre only
2.4 bar max.
3.5 bar max.
*
*
*
35 PSI max.
50 PSI max.
Q300 M Mini Rev.D
*
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Quickie Q300 M Mini and is the answer not in the manual?
Questions and answers
how to change the date on the display
we have full charge on the batties put a lithum charger on them and they are at 100 on both we hooked it up and still nothing and we have power coming from the battires but still no power to the control
If the Sunrise Medical Quickie Q300 M Mini has fully charged batteries but shows no power to the control, possible issues could include:
1. The main switch or mains plug is not turned on.
2. The battery connectors are not properly connected (check RED, BLACK, and YELLOW connectors).
3. The charger or charging cord is damaged or under stress.
4. The control system is switched off or malfunctioning.
5. There may be a fuse issue (e.g., 15A fuse not functioning).
Check all connections, switches, and fuses to ensure proper power flow.
This answer is automatically generated