Table of Contents
Advertisement
Quick Links
baby unit
(=BU) 1094SB
1
Power On/O
2
Nightlight control
No movement sensor alarm
3
4
Movement sensor light ashes green
with each movement baby makes
Camera
5
6
Infrared for night vision
Microphone
7
8
Low battery indicator
9
Volume control 9a) Up 9b) Down
10
Sensor pad input socket
11
Camera tripod mount
12
Mains adaptor input socket
13
Sensor pad switch on/o
14
Battery compartment
15
Temperature detector
Sensor pad sensitivity switch
16
6
7
8
9a
9b
Press to power on or o .
LED lights up amber when switched on.
Low. medium, high.
ON - when alarm is triggered.
FLASHES - if alarmed but child then starts
to move again.
OFF
FLASHES ORANGE when battery is low
if using batteries. CONSTANT ORANGE
when using AC power adapter.
Takes 4 x AA alkaline batteries (not included).
Remove casing using a screwdriver.
Low, medium and high.
10
11
12
5
4
3
2
position
for leads
1
13
14
15
movement sensor pad
Sensor pad
17
Connection lead plugs into baby unit
18
19
Connecting plug
16
17
18
19
Advertisement
Table of Contents
Related Manuals for Tommee Tippee 1094SB
Summary of Contents for Tommee Tippee 1094SB
- Page 1 (=BU) 1094SB Power On/O Press to power on or o . LED lights up amber when switched on. Nightlight control Low. medium, high. No movement sensor alarm ON - when alarm is triggered. FLASHES - if alarmed but child then starts to move again.
- Page 2 digital video monitor with movement sensor pad INSTRUCTIONS FOR USE model 1094S tommeetippee.com...
-
Page 3: Parent Unit
parent unit (=PU) 1094SP Mains power on/o In monitoring mode: Press to power on or o the unit. Zoom In monitoring mode: Press to zoom in. Press again to zoom out Power indicator GREEN = charging Talkback In monitoring mode: Press and hold to talk back with baby unit. -
Page 4: The Parent Unit
parent unit LEDs On when parent unit is connected with MAINS POWER AC power adaptor and without battery 20°C 20°C pack installed NIGHT LIGHT Medium High charging your monitor before rst use: Signal obtained, but no connection SIGNAL STRENGTH THE PARENT UNIT: Signal weak The parent unit is supplied with a rechargeable battery pack. -
Page 5: Setting Up The Parent Unit
Press POWER on the baby unit until the POWER INDICATOR is on. The baby unit is now powered on and • Never use Tommee Tippee monitor adaptors with any other equipment. Nor should you use any will link with the parent unit. - Page 6 • The tommee tippee closer to nature movement sensor pad is NOT a medical device and is NOT The monitor has the ability to monitor your baby’s movements via the highly sophisticated movement designed to prevent cases of Sudden Infant Death Syndrome (SIDS). This tommee tippee closer to sensor pad.
-
Page 7: Using The Nightlight
parent unit menu options - continued adjusting volume of baby unit Press UP to increase or DOWN to decrease the volume of the baby unit. ▲ ▼ An audible alert will emit when you reach the highest or lowest volume level. LEVEL 1 LEVEL 2 LEVEL 3... - Page 8 adjusting the sound sensitivity paging to locate the parent unit You can change the level of sensitivity on your baby monitor to suit your baby. For example, if your baby is a UP (9a) and DOWN (9b) keys are pressed for 3 seconds on the baby unit at the same time, If both ▲...
-
Page 9: Troubleshooting
1.5 metres. your Tommee Tippee monitor is not a medical device, nor a device to prevent cases of Sudden Infant • The baby unit may be switched o . Switch on the baby unit. -
Page 10: Technical Speci Cations
Switching mode power supply, 6V/800mA or 950mA declare under our responsibility that the electrical product: Li-Polymer batteries Transmitting power: 100mW Tommee Tippee Model 1094S Operating temperature: 10°C to 39°C Closer to Nature Digital Video Baby Monitor Range Indoor => 50m, Outdoor 300m approx. depending on the...
Need help?
Do you have a question about the 1094SB and is the answer not in the manual?
Questions and answers