Fire Hazard Protection; Injury Prevention - Silvercrest SEK 2000 B2 Operation And Safety Instructions

2.3 Fire hazard protection

Fire risk!
Since the device operates at high temperatures, observe the
following safety instructions to prevent fire hazards.
Risk of overheating!
To avoid overheating of the device, never cover it with
anything.
Do not place any flammable objects (e.g. curtains, paper, etc.) in
the immediate vicinity of the device during operation.
Never use the device to dry textiles or other things on, above or in
front of the device.
When setting up the device, observe a minimum clearance of
0.5 m from other devices or the wall.
Never operate the device in potentially explosive atmospheres or
in the vicinity of flammable gases or liquids.
Never place the device directly under a wall-mounted power socket
as the heat generated could damage its electrical components.
Always ensure that air can always enter and exit the device freely.
Failure to do so may result in heat build-up in the device.
Never leave the device running unattended. Damage is almost
always indicated by the formation of intense odours. If this occurs,
unplug the power cord immediately and arrange for the device to
be inspected.

2.4 Injury prevention

Observe the following instructions to prevent injuries.
Please take care to ensure that the mains power cable never
becomes a tripping hazard or causes someone to get caught in it
or step on it.
10 GB/IE/NI/CY/MT