Setting The +48V Power Supply - Sony WRT-8P Operating Instructions Manual

Settings
Adjusting the Audio Input
Level
You can change the audio input level in
a range of -60 dBV to –40 dBV (when
the MIC/LINE selector is at MIC
position) or –20 dBV to 0 dBV (when
the MIC/LINE selector is at LINE
position).
1 Set the MIC/LINE select switch
according to the equipment connected
to the audio input connector.
When a microphone is connected to this
unit, set the selector to MIC position;
when a mixer, etc., is connected, set it
to LINE position.
2 Turn the AF LEVEL control so that
the AF/PEAK indicator does not light in
RED color continuously.
Occasional lighting of the AF/PEAK
indicator in RED is acceptable.
Setting the +48V power
supply
You can set the +48V power supply for
the electric condenser microphone in
Setting mode.
1 Set the transmitter to Setting mode.
2 Press the SET button until the "MIC"
or "MIC+48" indication appears on the
display.
3 Press the + button to select the setting
"MIC+48", or press the – button to select
the setting "MIC"
"MIC+48" shows the +48V power is set,
and it is supplied when MIC/LINE
switch is set to MIC position in Transmit
mode.
4 Set the POWER switch to OFF to
release Setting mode. Or, press the SET
button to continue operations in Setting
mode.
The next time you turn on the transmitter
by setting the POWER switch to ON, the
transmitter enters Transmit mode with
the selected power supply setting.
12