Assigning An Ip Address; Accessing The Live Video Stream - Motorola solutions IndigoVision BX-2MP-BO-S-IR Installation Manual

Camera's Web Interface: enter the camera's IP address in a web browser to access the web interface. If the
l
camera is in the factory default state you will be redirected to the Add a new user page to create the first user.
For more information, see the IndigoVision Camera Web Interface User Guide.
Camera Configuration Tool version 1.4.4 or later: cameras discovered in the factory default state will be
l
identified by . Select the Admin Users tab to create the first user. For more information, see the help section
built into the Camera Configuration Tool.
Tip: If you are connecting your camera to a 3rd party VMS, you will need to set up the first user through the
camera's Web Interface or Camera Configuration Tool.

Assigning an IP Address

The device automatically obtains an IP address when it is connected to a network.
Note: If the device cannot obtain an IP address from a DHCP server, it will use Zero Configuration Networking
(Zeroconf) to choose an IP address. When set using Zeroconf, the IP address is in the 169.254.0.0/16 subnet.
The IP address settings can be changed using one of the following methods:
Device's web browser interface: http://<camera IP address>/.
l
ARP/Ping method. For more information, see
l
Note:
Cameras do not have a default username or password and will be in a factory default state. You
l
must create a user with administrator privileges before the camera is operational. For more
information, see
Accessing the Live Video Stream
Live video stream can be viewed using one of the following methods:
Web browser interface: http://< camera IP address>/.
l
Network Video Management software application (for example, IndigoVision Control Center).
l
Note:
Cameras do not have a default username or password and will be in a factory default state. You
l
must create a user with administrator privileges before the camera is operational. For more
information, see
Assigning an IP Address
Setting the IP Address Using the ARP/Ping Method on
Initializing a Camera Username and Password on the previous
Initializing a Camera Username and Password on the previous
page 18.
page.
page.
11