Related Manuals for LEISURE-TEC myCOOLMAN CEP 47
Summary of Contents for LEISURE-TEC myCOOLMAN CEP 47
- Page 1 CEP FRIDGE·FREEZER Operation Manual for AC/DC Fridge ·Freezer Model CEP 47 www.mycoolman.com.au www.mycoolman.com.au www.mycoolman.com.au LEISURE-TEC Australia Pty Ltd...
- Page 2 CEP FRIDGE·FREEZER Contents Important Safety Warnings page Important Product Information page Product Features page LED Control Panel & Operation Instructions page 4-5 Handle Fitting Instructions page Two Way Opening and Removable Lid page Emergency Override page Cleaning & Maintenance page Troubleshooting page Status Indicator...
- Page 3 CEP FRIDGE·FREEZER Important Product Information • Make sure the voltage is within the correct • Best performance is achieved in ambient range for socket and cable being used. temperatures between +10 °C and + 43 °C. • Do not place any electrical devices inside •...
- Page 4 CEP FRIDGE·FREEZER LED Control Panel & Operation Instructions Control Panel CEP 47 Power/Status Power Switch Indicator Light LED-Display Temperature Settings Turbo Switch Turbo Indicator Light NOTE: Temperature can be set from –18 ºC to +10 ºC Turning the unit on and off: Step 1: Plug in the AC or DC power cable (ensure power is on at source).
- Page 5 CEP FRIDGE·FREEZER LED Control Panel & Operation Instructions Engaging Turbo mode: What is the purpose of Turbo Mode? It enables the compressor to run at a higher speed, therefore achieving faster cooling to your nominated temperature. Step 1: Press the button once to turn on.
- Page 6 CEP FRIDGE·FREEZER Handle Fitting Instructions In your myCOOLMAN CEP 47 you will receive handle kit. Contents: 1. 2 x handle assemblies (complete) 2. 8 x Hex Head SS set screws 3. 1 x 5 mm Hex tool (Allen key) Assembly process:...
- Page 7 CEP FRIDGE·FREEZER Two Way Opening and Rwemovable Lid Purpose for removing the lid: CEP 47 This lid can be removed to aid with cleaning and to change the opening direction. You can change the direction of the lid by following the below instructions. How to remove the lid: Open the lid fully, then overextend, pushing lid past the “fully open point”...
- Page 8 CEP FRIDGE·FREEZER Emergency Override Fuse 6.3A The Emergency Override Switch is NOTE: located just below the main control • In EMERGENCY OVERRIDE, the cooler runs panel next to the power inlets with full cooling capacity (i.e. will chill as heavily as possible with no regard to the For normal operation the switch is in the set temperature) and may freeze.
- Page 9 Unusual noise when refrigerator is working • The refrigerator is not placed on a level surface. If none of the above solves your issue, see page 3 or contact Leisure-Tec. NOTE: At inclinations of more than 15 ° the compressor noise level may increase (without any effect on the cooling performance).
- Page 10 Status Indicator E0 flash every 4 seconds temperature sensor issue: • Contact Leisure-Tec on 1300 07 2018 E1 flash every 4 seconds - low voltage & Battery Protection: • An E1 will occur when the battery protection level has been reached.
- Page 11 CEP FRIDGE·FREEZER Notes: page 11...
- Page 12 Designed in Germany, made in China for LEISURE-TEC Australia Pty Ltd 50 Metrolink Circuit Campbellfi eld, VIC 3061 Australia www.mycoolman.com.au...
Need help?
Do you have a question about the myCOOLMAN CEP 47 and is the answer not in the manual?
Questions and answers
Why is my cool man fridge showing 42 when it is set at -15 c and seems to be freezing ok
Why is my coolman displaying 30 degrees C when it has been set to 2? I can hear the compressor working continuously when plugged into 24v wall point
The myCOOLMAN CEP 47 may be displaying 30°C instead of 2°C and running the compressor continuously due to several possible reasons:
1. Poor Ventilation – Ensure there is at least 100 mm of space around all vents for proper airflow.
2. Too Much Warm Product – If too many warm items are placed inside, it can take longer to cool.
3. Lid Issues – Check if the lid is properly latched and the seal is intact.
4. High Ambient Temperature – If the surrounding temperature is too high, cooling efficiency may decrease.
5. Temperature Setting – Verify that the temperature is correctly set and hasn't been accidentally increased.
6. Power Supply Issues – Try a different power source to rule out voltage irregularities.
7. Fan or Compressor Fault – Continuous compressor operation may indicate a fan failure or over-temperature condition.
If none of these resolve the issue, further troubleshooting or servicing may be required.
This answer is automatically generated
Hello team, my CEP 47 is running but not cooling. Any ideas that I might be able to do before getting a service? Thx
Your LEISURE-TEC myCOOLMAN CEP 47 may be running but not cooling due to the following reasons:
- Too much product inside the unit.
- Lack of air circulation between items in the fridge/freezer.
- Too much warm product inside the unit.
- The lid is unlatched or open.
- The lid seal is broken.
- Poor ventilation (ensure at least 100 mm of space around all vents).
- Ambient temperature is too high.
- Temperature setting is too high.
Check these factors and make necessary adjustments. If the issue persists, refer to the manual or contact Leisure-Tec for further assistance.
This answer is automatically generated