Resetting All Program Back To Factory Defaults; Setting The Date And Time; Setting The Register Print Format - Elite CR-202 Manual

24
Quick Set-up – Basic Programming
Quick Set-up
The following sequences are the only ones required before beginning basic register operations. Once you have unboxed
the cash register and ensured that all the components are enclosed. You MUST reset the machine using the "Resetting
all program back to factory defaults" operation shown below. This procedure can be carried out at any time, however any
programming or sales information previously entered will be erased.

Resetting all Program Back to Factory Defaults

This will restore the program back to factory settings removing any previously carried out programming and sales totals
stored in the register
Note :- ALL PROGRAMMING WILL BE LOST AND THE MACHINE WILL BE CLEARED OF ALL TOTALS
P.Mode

Setting the date and time

P Mode

Setting the register print format

The register has a single roll printer. This roll can be used to issue receipts to customers or to record the sales
on the journal. The register has the ability to store the journal electronically turned on within program option 7.
Journal Roll
P Mode
Customer Receipt
VOID
LAST
The display shows CLEAR
A receipt will be printed saying Default Restored
X /
TIME
Day
Hours
Example
X /
2
TIME
1
0
or
0
SUBTOTAL
Month
Minutes
22, January 2003 at 1.00pm
2 0 1
3 0
0
R . A
5
R.A.
5
R.Mode
SUBTOTAL
Year
(24 Hour clock)
0 3
SUBTOTAL
SUBTOTAL
1
SUBTOTAL
0
SUBTOTAL
R.Mode
SUBTOTAL
R.Mode
CASH
CASH