Related Manuals for Devine EZ-Creator Key XL
Summary of Contents for Devine EZ-Creator Key XL
- Page 1 EZ-Creator Key XL User Manual The information included in this user manual is subject to change at any time and without notification: Version: Date and author initials: 02-11-2020 RV Revision date and author initials: -...
- Page 2 Introduction Thank you for purchasing the Devine EZ-Creator Key XL. This compact MIDI keyboard offers ideal, hands-on control over the parameters of a DAW or other software programmes where using a mouse and computer keyboard can be restricting. The small size and USB- bus powered design combined with the practical control features and smooth software integration gives you everything you need for streamlined audio production.
-
Page 3: Safety Instructions
Safety Instructions WARNING! Keep this device away from moisture, water and rain to prevent risk of electric shocks! Every person involved with the installation, operation and maintenance of this device must: - Be qualified. - Be skilled. - Have read the instructions included in this user manual. - Be sure that neither the device nor any included accessories are damaged. - Page 4 - Should the device not be used in the manner described in this user manual, damages or even injuries could occur. Devine cannot be held responsible for any injuries or damages that occur as a result of improper use of this product.
- Page 5 Suitable for indoor use only: This product was designed for indoor use only. The maximum environmental temperature must not exceed 40 degrees Celsius (104 degrees Fahrenheit). Contact: Devine Pro Audio Products Verrijn Stuartweg 18 4462 GE Goes The Netherlands Please do not send any physical products to this correspondence address.
- Page 6 Using the EZ-Creator Key XL Without Bitwig 8- Track Any of the Devine EZ-Creator USB MIDI controllers can be used with software other than Bitwig. Since MIDI devices are universal, it is possible to use almost any software that supports MIDI over USB in combination with any of the EZ-Creator controller models.
- Page 7 - laser software - general production software from other developers - podcasting and broadcasting software - tablature software - and more Please note that, when using third-party software, settings may need to be changed to ensure compatibility. Always read the applicable software instructions to be certain of this. Compatibility with third-party software cannot be guaranteed.
-
Page 8: Product Features And Specifications
(for example) the included Bitwig software or other music production software or DAWs (Digital Audio Workstations). Below, you will find an overview of all of the features offered by the EZ-Creator Key XL: 1 1 3 1. -
Page 9: System Requirements
A USB-B port has also been included. This doubles as a power input as well as the MIDI data output to a computer or laptop. The EZ-Creator Key XL can be powered via USB while sending MIDI data via the 5-pin DIN port, making the device as versatile as possible. -
Page 10: Basic Functionality
Basic Functionality Connecting the EZ-Creator to a computer or laptop The EZ-Creator should be automatically recognised as a generic MIDI input and output device as soon as it is connected to a computer or laptop. If you’re using an application that supports MIDI input, go to the settings and select the EZ Creator as the MIDI INPUT device. - Page 11 Momentary (only sends a signal when held down, sends no signal when idle) Toggle (On/Off function, press once to switch on, press once more to switch off) Value on / Value off Appendix: Graphic of the velocity setting options that can be selected using the editor: The information included in this user manual is subject to change at any time and without notification: Version:...
-
Page 12: Specifications
Specifications General features: – compact EZ-Creator Series MIDI keyboard – 49 compact keys – multifunctional slider (pitch-bend, modulation or volume) – Octave, Transpose and Edit buttons with ‘+’ and ‘-’ adjustment buttons – various programming options – control editing software included for function customisation –...
Need help?
Do you have a question about the EZ-Creator Key XL and is the answer not in the manual?
Questions and answers