Set Iron Temperature; Steam Jet Function - Silvercrest SDRB 1000 C1 Operating Instructions Manual

Hide thumbs Also See for SDRB 1000 C1:

Operating instructions manual (94 pages)

Operating instructions manual (54 pages)

Operating instructions manual (54 pages)

Table of Contents

Available languages

__NAS279803_Dampfbuerste_B5.book Seite 44 Donnerstag, 23. Juni 2016 10:35 10

• If your tap water is of medium hardness

or higher, please mix in some distilled

water:

Hardness of the

Distilled water :

tap water

very soft/soft

medium

hard

very hard

• Your local waterworks will inform you of

the hardness of your water.

1. Disconnect the mains plug 10 from the

wall socket.

2. Turn the temperature controller 4 to

MIN.

3. Figure A: push the unlocking mecha-

nism 6 of the water tank 1 towards the

rear.

4. Hold the water tank 1 by the side

lugs 13.

5. Figure A: lift the water tank 1 up ver-

tically. The temperature controller 4 re-

mains on the device.

6. Open the cover 2 over the filler open-

ing 3.

7. Fill in the water with the measuring

beaker 15 up to the MAX mark on the

water tank 1.

8. Close the cover 2 over the filler open-

ing 3.

9. Place the water tank 1 onto the device.

The water tank must be heard to en-

gage with the unlocking mechanism 6.

44 GB

6.3

Mainte-

nance

symbol

tap water

1 : 1

2 : 1

3 : 1

1. Set the desired temperature using the

2. The control lamp 7 is lit for as long as the

6.4

Warning: risk of burns from steam and

sprayed hot water when using the

steam jet button 11. When using the

steam jet, always point the sole

plate 14 towards the item of laundry or

ironing board.

NOTES:

• The steam jet function requires a high

temperature.

• The steam jet function can be used with

or without the brush attachment 17.

1. Select a setting for the temperature con-

2. Start ironing as soon as the tempera-