Proceq ZAA 2600.SW Instruction Manual page 21

Use of the friction sets for ASTM D3450:
•
Slide on the weight for ASTM D3450 and screw it
in place.
•
Use a sponge of 95 x 38 x 38 mm (3.74 x 1.5 x
1.5").
•
Insert the sponge into the holder.
Spare sponge
Use of the friction sets for ASTM D4828:
•
Slide on the weight for ASTM D4828 and screw it
in place.
•
Use a sponge of 95 x 38 x 38 mm (3.74 x 1.5 x
1.5") .
•
Insert the sponge into the holder.
Spare sponge
Use of the friction sets for ASTM D2486:
•
Slide on the weight for ASTM D2486 and screw
it in place.
•
Place the cushion pad (with holes) in the holder.
•
Insert the brush bristles down into the holder.
•
The metal strip shown is interlocked with the
substrate according to ASTM D2486.
Spare brush
Spare cushion pad
Spare metal strip
Page 21