Related Manuals for Wren Kitchens Vogue TOWER UNIT Boiler Housing
Summary of Contents for Wren Kitchens Vogue TOWER UNIT Boiler Housing
- Page 1 TOWER UNIT Boiler Housing Assembly Guide 2070 x 600 2070 x 600 50/50 70/30 2250 x 600 Tall 2250 x 600 50/50 Tall 70/30 For Internal Use: FI.WR.INS.059_WKIN00180_Tower_600_2DrBoilerHoising_Guide_Rev5...
- Page 2 TOWER UNIT Boiler Housing Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Panel B Panel C Btm Panel C Top Panel E Legs Frontal (packed separately) x2 End Panel x1 Base Panel x1 Top Panel...
- Page 3 Step 1. Seat cam dowel (G) into holes in both end panels (B) as shown. Seat (G) Step 2. Cam Dowel into hole as Seat dowel (F) into shown. holes in both end panels (B) as shown. C Top C Btm Step 3.
- Page 4 TOWER UNIT Boiler Housing Assembly Guide Step 5. Front Position legs as shown. Ensure legs are rotated to also provide support to the end panels (B). Step 6. Secure each of the legs into place with 4 x 15mm screws (L) per leg. Front Leg position diagram Step 7.
- Page 5 Step 8. Attach hinge plates onto end panels (B) to suit as shown using screws already located in the hinge plates. Hinge side or sides to be mounted in accordance to Customer Specific Kitchen Plan. 70/30 50/50 HINGE HINGE POSITION POSITION 1826mm 1826mm...
- Page 6 TOWER UNIT Boiler Housing Assembly Guide Step 9. Attach hinge plates onto end panels (B) to suit as shown using screws already located in the hinge plates. Hinge side or sides to be mounted in accordance to Customer Specific Kitchen Plan. 70/30 50/50 HINGE...
- Page 7 Screws for attaching to walls are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for wall construction are used. Screw into any side units using the 30mm screws (K) provided to secure to unit. Screw just to the rear of the hinge mounting plates, at the top and bottom of both sides of the unit, place cover caps (M) on the heads to conceal them.
- Page 8 TOWER UNIT Boiler Housing Assembly Guide See Customer Specific Kitchen Plan For Tower Frontals Step 10. Insert hinge where required in holes as shown. Step 11. Secure hinges by tightening 2 x screws with hinge dowels attached. These are already positioned within the hinges.
- Page 9 For Internal Use: FI.WR.INS.059_WKIN00180_Tower_600_2DrBoilerHoising_Guide_Rev5 Page 8...
Need help?
Do you have a question about the Vogue TOWER UNIT Boiler Housing and is the answer not in the manual?
Questions and answers