Section 2. Installing Novell Netware 5.1 - HP ProLiant ML110 Operating System Installation Manual

Installing Novell NetWare 5.1
3. Follow the on-screen instructions to create the HP ProLiant ML110 server NetWare SCSI
driver diskette to be labeled HP disk NW SCSI.
4. Use the second diskette to create the LAN driver diskette to be labeled HP disk NW LAN.
5. Use the third diskette to create the Novell 5.1 patch to be labeled HP disk NW patch.
6. Use the fourth diskette to create the PSM4B diskette to be labeled HP disk PSM4B patch.
NOTE: To create the HP disk PSM4B patch, download first the psm4b.exe file from Novell's web site at
www.novell.com.

Section 2. Installing Novell NetWare 5.1

Phase 1 - Installing the Pentium
NOTE: If your hard drive contains data or is not new, HP recommends backing up the data and then
using a utility such as fdisk to erase all data and partitions from your hard drive.
1. Boot the server to a DOS bootable utility diskette.
NOTE: You can boot from the NetWare SBS 5 License diskette. Novell DOS 7 and all required DOS
utilities (fdisk, format, edit) are included on the diskette.
2. Type FDISK to create a 100 MB primary DOS partition on the primary drive (C:).
Remember to make it the active (bootable) partition.
The server restarts and boots to the DOS bootable utility diskette again.
3. From the drive A: prompt, format and transfer DOS system files to the hard disk DOS
boot partition by entering one of the following commands:
•
•
4. Create the appropriate directories and copy the necessary drivers and files to the DOS
boot partition by issuing the following commands at the DOS prompt:
C:
MD \NWUPDATE
CD \NWUPDATE
5. Insert the HP disk NW patch diskette you created earlier and enter:
COPY A:\*.*
6. Remove the HP disk NW patch diskette and insert the Novell NetWare 5.1 CD-ROM in
the drive, then reboot the server.
7. Press Enter to setup a new server then scroll down to make sure that Continue is
highlighted.
3-2
™
4/Celeron
When using the NetWare DOS utility, enter:
A:\>FORMAT C: /S /X
When using the MSDOS utility, enter:
A:\>FORMAT C: /S
HP ProLiant ML110 Server Network Operating System Installation Guide
™
Patch