Functions - WORKSWELL WIRIS PRO User Manual

13.3 Functions

FUNCTIONS submenu allows you to manually set the zoom level of the primary camera, switch which camera is
the primary and to switch between the available screen layout options.
ZOOM ‐ set the zoom value on the main camera (physical zoom on the visible spectrum camera, digital
zoom on the thermal camera).
MAIN CAMERA ‐ toggle which camera (thermal or visible light) is displayed as the primary (main) screen
and which is in the secondary (preview) screen.
ZOOM SIMULTANEOUSLY ‐ Zoom both cameras simultaneously
LAYOUT ‐ cycles between the available layout modes; (INSPECTION, SECURITY, FULLSCREEN and PiP Fusion).
THERMAL OPACITY ‐ Opacity of thermal camera image in PiP Fusion mode
The SECURITY layout removes the status bar at bottom of the primary view as well as the temperature legend on
right side of the thermal camera. The FULLSCREEN layout further removes the secondary screen, showing only
one camera type.
Note: Zoom level set for the camera in primary screen will be maintained for the same camera type once
it's toggled into the secondary screen.
E‐mail and Web Mobile:
info@workswell.eu +420 725 877 063
www.workswell.eu
Figure 13.4: Functions settings
Headquarters
ID:
U Albrechtova vrchu 12
Reg. No.: 29048575
155 00, Prague 13
VAT No.: CZ29048575
Czech Republic
13. MAIN MENU (SETTINGS)
Version: 201215 EN, 15 th Dec, 2020
All pictures are only for illustration.
Real values may vary.
39