Start Using The Tag; Activate The Tag; Attach The Tag To A Locatable Object; Reset Factory Settings - Nokia HAIP Tag LD-6T User Manual

Start using the tag

Activate the tag

Before using the tag, you must activate it and configure it for your HAIP
System.
1. Press the reset button to activate the tag
2. Within 30 seconds, send a configuration command to the tag. For
details, see HAIP System User Guide.

Attach the tag to a locatable object

Tie the tag to a locatable object through the mounting holes by using a
cable tie.

Reset factory settings

To reset factory settings, press and hold the reset button for 10 seconds.
5 Nokia LD-6T User Guide
WARNING: Never attach the HAIP Tag to hot surfaces.
IMPORTANT: For optimal operation do not attach the
HAIP Tag on top of a large metal surface. Refer to HAIP
System User Guide for further information.