Related Manuals for Hexagone SPOT PRO 100
Summary of Contents for Hexagone SPOT PRO 100
- Page 1 SPOT PRO 100 Version UDXYGPSP100N002-EN www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55...
- Page 2 Dear customer, Congratulations on your purchase of a HEXAGONE robotic pool cleaner SPOT PRO 100 and we trust you will enjoy the benefits of your new state of the art robotic cleaner. Your appliance has been designed, manufactured and checked with the utmost care so that you will be completely satisfied with it.
-
Page 3: Table Of Contents
2. Safety rules A. Power supply requirements B. Water requirements and pool conditions C. Rules for safe use 3. How to install your SPOT PRO 100? A. Unpacking B. Electrical connections 4. How to use your SPOT PRO 100? A. Pool entry of the Robot B. -
Page 4: Introduction
In order to ensure your safety and the validity of your guarantee, please read carefully and follow to the letter these instructions. The pool vacuum cleaner SPOT PRO 100 is the professional robot that must be used only by the qualified pool technicians. The pool vacuum cleaner SPOT PRO 100 is desiged for regulair maintenance of your pool up to 200 m . -
Page 5: Safety Rules
Voltage: <30VDC Protection index: IP68 B. Water Requirements The pool vacuum cleaner SPOT PRO 100 is designed for cleaning the pools under the following water conditions: • Temperature: 6°- 38° C / 43° - 100° F • Chlorine: 0.6 - 4 ppm •... - Page 6 • Always unplug the robotic vacuum cleaner SPOT PRO 100 from the mains when not in use. • The robot vacuum cleaner SPOT PRO 100 can only be started when the mains plug is connected to your electrical installation. www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55...
- Page 7 IMPORTANT! Many factors influence the condition of your pool. The pool robotic cleaner SPOT PRO 100 is a very passive product that does not affect the life of your pool. Be aware that over time, the deterioration, color loss, and...
-
Page 8: How To Install Your Spot Pro 100
• the remote control; • the technical manual. In summary SPOT PRO 100 is composed of four main units (image below): A cleaning unit containing the sucking pump, traction motors, the filter retaining the dirt and washable after use. A control unit, containing the electronic elements and the safety transformer, which has to be kept min. -
Page 9: Electrical Connections
(the robot must not roll on the ground to reach the pool). B. Electrical connections For your safety and the correct operation of your SPOT PRO 100 follow the instructions below: • Place the control box at a distance of at least 3.5 meters from the edge of the pool, avoiding direct exposure to the sun or rain. - Page 10 Be sure to keep hands and feet away from the mouving parts. Never place your hands or feet underneath the pool vacuum cleaner robot SPOT PRO 100. SPOT PRO 100 is suitable for the cleaning of pools up to 10x20m and operates in AUTOMATIC MODE using "AQUA POSITIONING TECHNOLOGY", independently choosing the most appropriate program, and in MANUAL MODE, controlled by radio control.
-
Page 11: How To Use Your Spot Pro 100
4. How to use your SPOT PRO 100? A - Pool entry of the Robot • The trolley and the control box of SPOT PRO 100 must be positioned in such a way that the Robot can reach all the surfaces of the pool while the minimum distance between the trolley and the edge of the pool is kept at 3.5m. -
Page 12: Automatic Mode
Now, thanks to its new intelligent program "AQUA POSITIONING TECHNOLOGY", all programming operations are carried out by the SPOT PRO 100 automatically, without user action. The AUTOMATIC mode is set by the manufacturer and starts as soon as the device is switched on. - Page 13 . You can then use your SPOT PRO 100 in MANUAL mode. Stopping a program To stop the SPOT PRO 100, either unplug it or press the key of the current program, in this case then: • the cleaning monitoring diodes stopped •...
-
Page 14: Manual Mode
4. How to use your SPOT PRO 100? C. MANUAL MODE This mode allows the user to control the robot using the remote control. Connect the robot to the control box then connect the control box to the mains supply, wait for the device to initialize (LEDs flashing on the start buttons, see explanation in the automatic mode section). - Page 15 4. How to use your SPOT PRO 100? Using Bluetooth® mode After downloading and installing your application, you can start it. For your information, the 2019 logo is: Then you should: 1. Connect your phone to the robot (connected to the electronic box itself plugged to the mains) nearby by pressing “DISCONNECTED! "...
-
Page 16: Cleaning And Maintenance
Take immediately the filter bag and filter holder off, then wash them with fresh water and rinse your SPOT PRO 100. Roll up the cable. If a torsion occurs, roll it out ((as you would with an extension cord), then store the robot. -
Page 17: Preventive Maintenance
Yearly maintenance at the end of the season is important to avoid deposits and deterioration due to water and dirt and to reach long-term economy. A well-maintained SPOT PRO 100 will surely result in better duration, economy and safety. D. Wear parts - service life... -
Page 18: Usage Tips And Troubleshooting
6. Usage Tips and Troubleshooting Your safety: Your robot SPOT PRO 100 has been manufactured according to the most rigorous standards. To ensure a safe operation, follow the instructions and the security rules indicated in this technical manual. • Only connect the Control Box to a power outlet with an earth connection and protected by a residual current circuit-breaker of 30mA maximum. - Page 19 6. Usage Tips and Troubleshooting In case of problem : A - The robot slides and doesn’t make good trajectories There may be 3 reasons: • The filter bag is full or dirty: just clean it. • Although the water appears clear, there are microscopic algae in your basin that are not visible to the naked eye, which make the bottom slippery and prevent the robot to roll properly.
- Page 20 6. Usage Tips and Troubleshooting D. The robot remains balancing on step ledge Your robot is equipped with side brushes. Under certain specific operating conditions, it may be necessary to remove its brushes to prevent the device from getting stuck on a stair nosing.
-
Page 21: Your Warranty
7. Your Warranty The present conditions correspond to the French laws in force at the date of their printing. A - Conditions We guarantee that all materials are technically sound and free of defects of materials and manufacture and that they are consistent with the state of the art and techniques at the time of entry to the market. -
Page 22: Purpose Of The Guarantee
• NF EN 60335-2-41/A1 January 2005 Household and similar electrical appliances - Safety - Part 2-41 : particular requirements for pumps Additional information relative to CE certification The swimming pool vacuum cleaning robot SPOT PRO 100 is certified CE according to the following instructions: • Machine directive 2006/42/CE •... -
Page 23: Generic Controls
8. Generic controls Applied to the device No. series ___________ Step Controls Initials of Operator Robot Tests Trolley Tests Control Box Tests Packaging control The verification of controls was carried out by Signature: Date: www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55... -
Page 24: Spare Parts And Nomenclature
9. Spare parts and nomenclature A. Robot PART NUMBER NUMBER AA0002N001 ROBOT BASE K00007N000 TROLLEY B00009N950 SPOT ARM 100-150 FULL BLACK EG0003N000 ROBOT SPOT RADIO CONTROL SEE DETAIL ON XYGPSP100-TRACTION PLAN SEE DETAIL ON XYGPSP100-MOTOR BLOCK C0CB30N700 AUTO-FLOATING CABLE GRAY30M SPOT FB0008N000 FILTRE SUPPORT VNFE25129-4-25-A4 SCREW PAN HEAD FLAT STAINLESS STEEL 4 BY 25 4 EK0503N000-F SPOT ELECTRONIC BOX... -
Page 25: Trolley
9. Spare parts and nomenclature B. Trolley PART NUMBER NUMBER KA0038N950 BLACK BASE CROCO TROLLEY KA0039N001 CROCO +100 TROLLEY WHEEL AXLE STRUCTURE KA0040N001 CROCO +100 TROLLEY HANDLE STRUCTURE DD0002N000 CROCO TROLLEY WHEEL VNFE25129-4-20-A4 SCREW PAN HEAD STAINLESS STEEL A4 - 4 BY 20 VNFE25129-4-25-A4 SCREW PAN HEAD FLAT STAINLESS STEEL 4 BY 25 VDIN125A-M4-A4 FLAT WASHER M4 MEDIUM - STAINLESS STEEL A4 8 VDIN1587-M4-A4 Stainless steel A4 cap nut M4... -
Page 26: Hood
9. Spare parts and nomenclature C. Hood PART NUMBER NUMBER HA0002N9C0 BARE IPPO BLACK CARBON HOOD VNFE25129-4-10 SCREW PAN HEAD STAINLESS STEEL A2 - 4 BY 10 VDIN985-M4-A4 Lock nut stainless steel A4 M4 HA0003N000 ARTICULATION SHEET ARM ON IPPO VD0002N000 SPECIAL SCREW M8 ARM FIXATION VDIN985-M8 Lock nut stainless steel A2 M8 VDIN125A-M5-L-A4 FLAT WASHER M5 L STAINLESS STEEL A4... -
Page 27: Traction
9. Spare parts and nomenclature D. Traction PART NUMBER NUMBER D00009N700PVA SPOT ROLLER WITH GRAY PVA DF0002N000 HEXAGONAL ROLLER AXLE QA0007N000 GUIDE PULLEY QE0012N000 D20x12 GUIDING PULLEY SPACER VDIN7985-5-50 SCREW PAN HEAD CRUCIFORM 5 BY 50 - STAINLESS STEEL A2 QE0007N000-8.2-12.0-7.5 BLACK NYLON SPACER D8.2XD12.0X7.5MM VDIN7985-5-70 SCREW CYLINDRICAL HEAD CRUCIFORM 5 BY 70 - STAINLESS STEEL A2 4 DB0009N950 BLACK SPOT OVERMOLDED CRAWLER... -
Page 28: The Motor Block
9. Spare parts and nomenclature E. The motor block PART NUMBER NUMBER PB0008N000 PLASTIC DIFFUSER M00032N000 SPOT MOTOR BLOCK QA0008N000 TOOTHED PULLEY VDIN7981-2.9-9.5 SCREW LARGE CRUCIFORM SHEET 2.9 BY 9.5 - STAINLESS STEEL A2 AF0004N000 PUMP PROTECTION GRILL PB0007N000 PLASTIC TURBINE PB0009N000 PLASTIC DIFFUSER SUPPORT YOYO VDIN7985-3-20 CRUCIFORM SCREW 3 BY 20 - STAINLESS STEEL A2 VDIN985-M3 Lock nut stainless steel A2 M3... -
Page 29: Filtration
9. Spare parts and nomenclature F. Filtration PART NUMBER NUMBER FB0009N000 BASE PLATE FB0010N000 MOUTH VACUUM BACKGROUND FB0015N000 VERTICAL SUPPORT OF CROCO FILTER BAG JD0005N000 CROCO SPOT EVACUATION VALVE VDIN934-M 5-A4 VDIN7985-6LOB-5-8-A 4 JD0004N000 NON-RETURN VALVE ON CROCO SPOT HB0009N100 YELLOW STICKER SPOT PLATE www.myhexagone.com •... -
Page 30: Rollers And Coatings
9. Spare parts and nomenclature G. Rollers and coatings PART NUMBER NUMBER D00009N000 CROCO ROLLER WITH BEARING DC0002N000 PVA FOAM FOR CROCO PART NUMBER NUMBER QV0004N000 PLASTIC FLAT BEARING QD0022N000 CROCO SPOT ROLLER SHUTTER VNFE25129-5-10-A4 SCREW PAN HEAD STAINLESS STEEL A4 - 5 BY 10 D00004N000 PLASTIC ROLLER www.myhexagone.com •... - Page 31 NOTES www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55...
-
Page 32: General Conditions Of Sale Hexagone Manufacture S.a
Hexagone Manufacture S.A.S. by the Customer, regardless of the time when it may have been brought to its knowledge. The fact that Hexagone Manufacture S.A.S. does not avail itself at any given moment of any one of these GCS may not be interpreted as a waiver of the right to avail itself of this at a later date. - Page 33 (15) days following the delivery date. No goods may be returned without our express agreement and goods may only be returned if fit for resale. The Customer shall allow Hexagone Manufacture S.A.S. to verify any defects to allow for these to be remedied.
- Page 34 The Customer may in no case resell, pledge or grant a guarantee on the good delivered and not fully paid for. Payment default on any deadlines may lead to goods being reclaimed. Where reclaims are made, deposits already paid shall be retained by Hexagone Manufacture S.A.S.
- Page 35 Hexagone Manufacture S.A.S. may assert to the Customer, within 48 hours after a formal notice which goes unanswered. In this case, Hexagone Manufacture S.A.S. is within its rights to seek a fixed rate of compensation of 15% of the total sale price from the Customer, as well as default interests and any legal fees incurred.
- Page 36 Our Youtube channel : Facebook : Twitter : Our application : Our flash code : myhexagone hexagone manufacture @HexagoneManufac App Store and Android watching products videos (opening May 15, 2019) Version UDXYGPSP100N002-EN www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55...
Need help?
Do you have a question about the SPOT PRO 100 and is the answer not in the manual?
Questions and answers