ZKTeco LF10 Quick Start Manual
  1. Manuals
  2. Brands
  3. ZKTeco Manuals
  4. IP Access Controllers
  5. LF10
  6. Quick start manual

ZKTeco LF10 Quick Start Manual

Hide thumbs

Advertisement

Table of Contents

Quick Start Guide
LF10/20
Version: 1.0
Date: June 2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LF10 and is the answer not in the manual?

Questions and answers

Related Manuals for ZKTeco LF10

Summary of Contents for ZKTeco LF10

  • Page 1 Quick Start Guide LF10/20 Version: 1.0 Date: June 2019...
  • Page 2 Overview LF10 LF20 Indicators Display screen Keypad Fingerprint sensor & Card swiping area (optional) USB port Reset button TCP/IP port Tamper switch Alarm Lock Exitbutton Powerin +12V Sensor BELL+ Bell BELL- Wiegandout Auxiliary input...

  • Page 3: Device Installation

    Device Installation Please insert the cable into the terminal before installation. ①Attach the mounting template sticker to the wall, and drill holes according to the mounting paper. ②Fix the back plate on the wall using wall mounting screws.Attach the device to the back plate.

  • Page 4: Standalone Installation

    Standalone Installation Alarm Smoke detector Door sensor Exit button Bell TCP/IP Reader Lock USB-disk Door Sensor, Exit Button, Alarm & Bell Connection Alarm Alarm power Exitbutton Bell BELL+ Door sensor BELL- Smokedetector Bell power Detector power...

  • Page 5: Lock Relay Connection

    Lock Relay Connection The system supports Normally Opened Lock and Normally Closed Lock. The NO LOCK (normally unlocked when power-on) is connected with 'NO' and 'COM' ports, and the NC LOCK (normally locked when power-on) is connected with 'NC' and 'COM' ports. Take NC Lock as an example below: 1)Device not sharing power with the lock 2)Device sharing power with the lock...

  • Page 6: Wiegand Output Connection

    Wiegand Output Connection Devices that support Wiegand input The device provides standard Wiegand26 output that can be used as a reader. Note: Whether it is powered by the access controller or not, it should connect the GND port with the access controller to ensure stable Wiegand transmission. Ethernet Connection RJ 45 IP address: 192.168.1.130...

  • Page 7: Power Connection

    Power Connection 12V DC Recommended power supply 1) Ratingof12Vand1.5A 2) To share the power with other devices, use a power supply with higher current ratings. Quick Start UserRegistration ViewRecords User Authentication Verified User Registration When there is no super administrator set in the device, press M/OK to enter the main menu.
  • Page 8 User Authentication Press the fingerprint/enter the password/swipe the card (optional) on the device. After successful verification, the interface is shown in the figure below. Verification is successful View Records View records on the device Press M/OK to enter the main menu and select [Attendance Search] to enter the record query interface.

  • Page 9: Ethernet Settings

    View records on the software 1. Connect the device to the network. 2. Login to the ZKAccess3.5 software. 3. Add the device on the software. Download the device records. Then you can click [Report] to view the records. Note: For specific operation of ZKAccess3.5 software, please refer to ZKAccess3.5 Security System User Manual.
  • Page 10 ZK Building, Wuhe Road, Gangtou, Bantian, Buji Town, Longgang District, Shenzhen China 518129 Tel: +86 755-89602345 Fax: +86 755-89602394 www.zkteco.com Copyright©2019 ZKTECO CO., LTD. All rights reserved.

This manual is also suitable for:

Lf20

Table of Contents

Save PDF