Bush Hog TOUGH 2615L Specifications

Bush Hog
®
2615L Flex Wing Rotary Cutters
Recommended Tractor HP Minimum 60 PTO
BUsH HOG

TOUGH FeaTURes

®
TOUGH 10 Gauge Deck Construction
TOUGH 7 Gauge strongbacks
TOUGH Inch sidebands
1/4
TOUGH Heavy Duty Wheel Hubs and axle spindles
TOUGH Independent spring Cushion at each axle arm
TOUGH Heavy Duty axle Turn Buckles
TOUGH Greaseable axle Pivot Points
TOUGH Driveline safety Retaining Rings
TOUGH 5 Year Gearbox Limited Warranty
TOUGH Powder Coat Paint
MODeL
Cutting Width
Cutting Capacity
Cutting Height
Overall Width x Length (from Clevis to Wheel Hub at Transport Height)
Transport Width (outside wing skid to outside wing skid)
Tractor PTO
Minimum Tractor HP
Deck Thickness
side Bands
Gearbox HP
PTO Driveline
Wing Driveline
slip Clutches
Blade Tip speed
Blades
Type Hitch
Wing Flex (operating)
Tires
axles
Wheel shock Protection
Deflectors

Options

Warranty

FeaTURes
• High blade tip speeds • Deep sidebands • Heavy duty wheel hubs • Quick detach gearbox shields

BUsH HOG eXCLUsIVe:

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
TOUGH
2
540 RPM/1000 RPM
235 - Transfer, 190 - Center, 190 - Wings
Input: Constant Velocity or Cardan/jackshaft - Cat. 5 (540 RPM)
Cat. 4 or 5 (1000 RPM)
(3) 2 - Friction Plates
16,289 FPM/540 RPM; 16,000 FPM/1000 RPM
x 4 inch Uplift with 6 inch Overlap
1/2
Self Leveling with Perma-Level Hitch ® or 2 Inch Ball Hitch or Swivel Clevis Hitch
87° Up to 22° Down
Laminated Tire, Used Aircraft Tire, Foam Filled Used Aircraft Tire,
Pneumatic 15 inch wheel (tire not included)
Single or Dual Wing Axles, Dual or Walking Tandem on Center
Independent Springs on Each Axle
Standard Front Belting and Rear Band, Optional Front and Rear Chains
Chain Shielding, Valve & Stand Kit, Deck Rings
1 year limited warranty with a 5 year gearbox limited warranty
• Perma Level Hitch • Cylinder style anti wrap device around lower gearbox housing
Driveline safety retaining rings
2615L
15 ft
1/2 inch Diameter
2 to 14 inches
15 ft 8 inches x 14 ft 10 inches
8 ft 11 inches
60 PTO
10 gauge
x 10 inches
1/4 1/2
ASAE Cat. 4
Page 30