Download Print this page

Advertisement

Quick Links

When using or handling your SMARTBAR equipment, do not bring it into contact with sharp or abrasive
objects/materials. We recommend jewellery/rings are removed as they can scratch the bar. Rings can also be
damaged by the knurling on the bar.
We do not recommend using SMARTBAR equipment outside (particularly on abrasive surfaces like rough concrete) or
on non-standard gym/studio flooring. We recommend working out on a smooth, firm surface or using a fitness mat
with a durable but soft surface (e.g. grey side of the Les Mills MBX MAT™)
The SMARTBAR has been designed and tested to withstand normal use within a LES MILLS workout, while loaded with
a maximum weight of up to 60kg/132lb. The SMARTBAR is not a replacement for a standard (Olympic)
barbell that is used for consistently heavy lifts.
We do not recommend applying weight to the central section of the SMARTBAR while it is lying on the floor. This
includes using the SMARTBAR as an aid for push-ups, or as a support for a user's weight. Using the SMARTBAR in this
way can result in the bar developing a permanent bend.
STORAGE
Store the SMARTBAR and weight plates indoors, keeping the equipment away from moisture or direct heat. Do not
store in extreme temperatures (<-5˚C/41˚F; >50˚C/122˚F).
For storage in a club/facility, we recommend using the SMARTBAR Storage Rack, or hanging vertically on a wall rack.
At home, we recommend storing the SMARTBAR horizontally on a solid, level surface, or on its end vertically. Always
ensure weight plates are removed from the bar for storage.
Do not leave the SMARTBAR bar (with or without weight plates attached) hanging over a SMARTSTEP™, or any other
object where the weights or the end of the SMARTBAR are unsupported or hanging off the ground.
CLEANING
Regularly clean SMARTBAR equipment by gently washing with water and a few drops of mild dish soap, using a soft
cloth or sponge.
Wiping the SMARTBAR bar with a soft cloth after using on carpet (or a household rug) will help to ensure fibres do not
become caught in the gator (where the weight plates connect).
DIMENSIONS & WEIGHT
Metric: Barbell = 131.2 x 13.1 x 9.1cm, 2.64 kg; Weight Set = 17kg (2x 1kg, 2x 2.5kg, 2x 5kg)
Imperial: Barbell = 51.65 x 5.17 x 3.56 inches, 5.85 lb; Weight Set = 37.5 lb (2x 2.2lb, 2x 5.5lb, 2x 11lb)
CONSTRUCTION
High-quality raw materials to ensure durability and safety. SMARTBAR equipment is tested for durability in a high-use
gym environment.
TM
SMARTBAR
– CRITERIA NOT COVERED BY WARRANTY
Cosmetic wear to the surface from regular use that does not affect the performance of the SMARTBAR
equipment (bar or weight plates)
Damage from abrasive floor surfaces including outside elements or factors or sharp objects
Damage from misuse/rough handling (e.g. incorrect vertical loading, dropping, dragging etc)
Improper cleaning with anything other than water with a mild detergent or a Les Mills recommended
alternative
Damage from excessive amounts of water or other liquids (e.g. submerging under water or using a
water blaster)
WARRANTY &
INSTRUCTIONS FOR USE
To make a warranty claim, either contact your local Les Mills authorised distributor
https://lesmills.com.au/smart-tech/equipment-care
or visit our website
https://lesmills.com.au/smart-tech/equipment-care
TM
Guidelines for use and care of the SMARTBAR
:
\

Advertisement

loading
Need help?

Need help?

Do you have a question about the SMARTBAR and is the answer not in the manual?

Questions and answers

Summary of Contents for LesMills SMARTBAR

  • Page 1 INSTRUCTIONS FOR USE cloth or sponge. Wiping the SMARTBAR bar with a soft cloth after using on carpet (or a household rug) will help to ensure fibres do not become caught in the gator (where the weight plates connect). DIMENSIONS & WEIGHT Metric: Barbell = 131.2 x 13.1 x 9.1cm, 2.64 kg;...
  • Page 2 To Unload: To release a weight plate, lay the SMARTBAR bar on the ground, pull the red handle towards The serial number for the SMARTBAR bar is located inside the gator head. Pull the release on the gator to reveal the the centre of the bar, then slide the weight off the bar.