Sony AM-NX1 Service Manual page 25

• Overall Adjustment Mode (Title Display)
LCD display
000 A s s y * *
: (Disc mark) At end of power supply adjustment: Outside lit
** : Left side = MO overall adjustment information
F* : MO overall adjustment completed
1* : Manual adjustment exists (overall adj. not completed)
0* : Not adjusted
Right side = CD overall adjustment information
*F : CD overall adjustment completed
*1 : Manual adjustment exists (overall adj. not completed)
*0 : Not adjusted
Note: Adjust the CD first, when performing adjustment.
• Adjustment Method of CD and MO Overall Adjustment
Mode
1. Set the test mode (see page 12).
[VOL--]
2. Press the . key or
justment mode.
LCD display
000 A s s y 1 1
3. Insert CD disc in the set, and press the
CD overall adjustment mode. Automatic adjustments are made.
LCD display
XXX
C D R U N
XXX : Item number for which an adjustment is being executed.
4. In case of CD overall adjustment NG, readjust from the NV
reset (see page 17), The temperature correction (see page 17)
may be omitted.
LCD display
000
* * * N G
*** : NG item number.
5. If OK through the CD overall adjustments, then perform MO
overall adjustments.
LCD display
000
C D O K
6. Insert MO disc in the set, and press the
MO overall adjustment mode. Automatic adjustments are
made.
LCD display
XXX M O R U N
XXX : Item number for which an adjustment is being executed.
key to activate the overall ad-
key to set the
.
key to set the
>
7. In case of MO overall adjustment NG, readjust from the NV
reset (see page 17). The temperature correction (see page 17)
may be omitted.
LCD display
000
* * * N G
*** : NG item number.
8. If OK through the MO overall adjustments, press the x key
to return to the test mode and terminate the overall adjustment
mode.
LCD display
000
M O O K
• Overall Adjustment error message
The following message will be displayed if adjustment
procedure is mistaken in the CD and MO overall adjustment.
Message Display timing
During CD/MO/DISC
CLOSE! automatic distinction
overall adjustment
During MO/DISC
automatic distinction
Set CD!
overall adjustment
During offset adjustment
Set MO! During offset adjustment
During CD/MO/DISC
NoTmp! automatic distinction
overall adjustment
During CD/MO/DISC
NoChg! automatic distinction
overall adjustment
AM-NX1
Description
DISC is not inserted.
• CD overall adjustment is not
completed in the MO overall
adjustment.
• CD and MO overall
adjustment is not completed
in the offset adjustment.
MO overall adjustment is not
completed in the offset
adjustment
Temperature correction
(item number 015)
is not finished.
Charge voltage adjustment
(item number: 755, 756)
is not finished
25