Dell S2319HS Disassembly Procedure

1
DELL S2319HS
Go to contents page
1. Disassembly Procedures:
S1
Open the Pizza carton with a proper tool.
Take out all of the
cable, power cable, USB cable, CD&user's manual,
S2
stand and base from the carton from the
carton.(Note: It depends on whether users returning
the accessories)
Take out of the Paper-top and monitor from the
S3
carton, then take out the monitor from the EPE bag
and put the LCD monitor on a protective cushion.
accessories including QSG,
QSG
power cable
DP cable
USB cable
base
stand
user's manual
Use a Philips-head screwdriver to remove four
S4 screws for unlocking mechanisms.
(No.1~4 screw size=M4x10; Torque=12
DP
Wedge your fingers between the rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
S5
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
2
Lift the rear cover up carefully. Disconnect the USB
S6
FFC cable from the connector of the interface board,
and then remove the rear cover.
±
0.5kgfxcm)
2
3
4
1
.
3
4
1