Bass Pro Shops MEGA CAST MG10HA Quick Start Manual

BAITCAST REEL
Weight Max Drag Line Capacity
Model Bearings (oz.) (lbs.) Mono/Braid (lbs./yds.) IPT
MG10HA 4 (3+1) 7.3 12 10/130, 12/105, 14/90 27"
30/160, 40/130, 50/85
MG10HLA 4 (3+1) 7.3 12 10/130, 12/105, 14/90 27"
30/160, 40/130, 50/85
Congratulations on your purchase of a MegaCast Baitcast Reel! This reel is
®
manufactured with the highest quality components and has been extensively
tested to ensure that your day on the water is more productive. Please take a
moment to familiarize yourself with the integrated performance-enhancing
features of this reel before use. This will help you to optimize the reel's
settings and even further increase your fishing success. We wish you the best
of luck in your future angling adventures!
Graphite Frame
The frame was designed to be lightweight, durable, and corrosion-resistant.
Powerlock™ Instant Anti-Reverse
Your reel is equipped with our Powerlock instant anti-reverse system. This is a
special type of bearing that allows the handle to only turn forward. There is no
play in the handle, so you have complete control during the retrieve and no
"loose" feeling, which is important during stop-and-go retrieves.

Star Drag

Your reel has a powerful star drag for fighting stronger, faster fish. The drag
washers provide a smooth even flow of line when a fish surges to prevent the
line from breaking. Even when wet, these washers won't slip or grab. The
star drag is the star-shaped wheel located behind the reel handle. To adjust,
simply turn forward to increase drag or turn backward to decrease the amount
of drag. To properly set the drag, you will need a spring scale. Your drag
should be set at 25% of the test rating of your line. Tie a loop in the end of
your main line. Run it through the guides of your rod and attach it to the hook
on the scale. Pull the scale until it registers 25% of the line rating. If you are
using a 10 lb. test then you should set your drag to start slipping at 2.5 lbs.
Double-Anodized-Aluminum Spool
The spool has been double-anodized to provide years of corrosion resistance.

Adjustable Magnetic Braking System

Your reel is equipped with an easy-to-use, externally adjustable magnetic
brake system. This system should be used to help eliminate backlash. Simply
rotate the dial on the left sideplate to increase or decrease the amount of
magnetic force applied to the spool. The more force that is applied, the faster
the spool stops spinning.
Gear

Care and Lubrication

Ratio Your new reel is designed to provide years of dependable service. But
like any other precision machine, periodic cleaning and maintenance is
6.6:1
required for continued peak performance.
6.6:1
Reels made today require both a lightweight oil and grease. Oil and grease
should be used sparingly; too much can have a negative impact on reel
performance. There are lightweight oils and grease made specifically for
fishing reels that can be found at basspro.com
As a rule of thumb, oils should be used to lubricate any moving part on the
reel, e.g. ball bearings, bushings, handle joints, bail springs, etc. Grease
should be used to lubricate the main drive gear and pinion gear.
We do not recommend using any multipurpose oils. Many of these oils have
properties that will attract dirt and dust to the internal parts. This may cause
excessive wear and reduce the life of the reel.
After each trip, the reel should be checked for dirt or sand. If it has been
exposed to saltwater, the spool should be removed and the entire reel rinsed
in freshwater. Dry with a soft cloth and lubricate the reel as described above.
Bass Pro Shops Fishing Reel Limited Warranty
®
Bass Pro Shops will repair or replace (at our discretion) any Bass Pro Shops
reel which proves to be defective in workmanship or materials within one year
from the original date of purchase. You must save your dated sales receipt for
warranty validation. This warranty gives you specific legal rights, and you may
have other rights which vary from state to state or province to province.
For reels purchased through our catalogs or Bass Pro Shops online:
• For reel replacement only: Return your reel postage prepaid with your
dated sales receipt to the Return Center address listed on your receipt.
• For reel repair only: Return your reel postage prepaid with a copy of
your dated sales receipt as proof of purchase and warranty validation to
the Outdoor World Rod & Reel Repair address below.
®
For reels purchased through Bass Pro Shops retail locations:
• For reel replacement only: Return your reel (postage prepaid if
sending by mail) along with your dated sales receipt to the store from
which it was purchased.
• For reel repair only: Return your reel postage prepaid with a copy of
your dated sales receipt as proof of purchase and warranty validation to
the Outdoor World Rod & Reel Repair address below.
Outdoor World Rod & Reel Repair
2300 E. Turner, Suite M
Springfield, MO 65803
This warranty does not cover lost parts, malfunctions, or damage due to
abuse, accidents, or normal wear. Failure to clean, lubricate, and provide
reasonable and necessary maintenance will void the warranty. Repairs needed
to your reel due to abnormal use or modification, or after warranty expiration,
are available for a reasonable charge from Outdoor World Rod & Reel Repair,
providing the reel is returned postage paid.
Except to the extent prohibited by applicable law, there are no warranties or
conditions, express or implied, other than those expressly set out herein. Bass
Pro Shops shall not, under any circumstances, be liable for an amount greater
than the actual purchase price of the product nor for any special, incidental, or
consequential damages suffered or incurred in connection with the product
and Bass Pro Shops does not assume, and does not authorize any person to
assume for it, any obligation or liability other than those expressly set out
herein.
MG10HA/MG10HLA
2 3 4 5
6 7
8 9 10
11 12 13 14 15 16 8 17 18 19 20
61 62 63 64 65 66 67 68 69 70 71
72
MEGACAST BAITCAST REEL
NO. PART NAME NO. PART NAME
1 FRAME 23 LINE GUIDE
2 TAPPING SCREW ×2 24 TAPPING SCREW ×2
3 STOPPER PLATE 25 E-RING
4 STOPPER 26 BUSHING
5 COIL SPRING 27 LEVEL WIND
6 STOPPER LEVER 28 HOOD
7 TAPPING SCREW 29 LEVEL WIND NUT
8 TAPPING SCREW ×3 30 WASHER
9 TAPPING SCREW ×2 31 LEVEL WIND PIN
10 BALL BEARING 32 PIPE
11 CONTROL DIAL 33 WORM SHAFT
12 CLICK SPRING 34 BUSHING
13 PALM SIDE COVER 35 WORM GEAR
14 SLIDE 'B' 36 E-RING
15 SLIDE 'A' 37 PILLAR
16 COIL SPRING ×2 38 TAPPING SCREW ×2
17 SPOOL COVER 39 BALL BEARING
18 MAGNET HOLDER 40 E-RING
19 WASHER 41 BEARING PLATE
20 HEX-RING 42 CRANK SHAFT
21 SPOOL ASSY. (1B/B) 43 O.S GEAR
22 TAPPING SCREW ×2 44 RATCHET GEAR
22
28
22
23
29
32 33 34 35 36
24 25 26 27
30
31
37
38
39
40 41 42
43 44 45 46
1
47 48 49
50
21
58 59 60
51 52 53 54 55 56 57
82 83 84
74 76 78
80 81
73 75 77 79
NO. PART NAME NO. PART NAME
45 WASHER 67 WASHER
46 DRIVE GEAR 68 SPRING WASHER ×2
47 KICK LEVER HOLDER 69 WASHER
48 KICK LEVER 70 STAR DRAG
49 SPRING 71 LEAF SPRING
50 TAPPING SCREW 72 TAPPING SCREW ×2
51 THUMB BAR 73 O–RING
52 BUSHING 74 BUSHING
53 CLUTCH CAM 75 HEX–RING
54 SPRING 76 WASHER
55 CLUTCH LINK 77 WASHER
56 TAPPING SCREW ×2 78 WASHER
57 E-RING 79 TENSION KNOB
58 CLUTCH 80 HANDLE ASSY.
59 COIL SPRING ×2 81 HANDLE KNOB CAP ×2
60 PINION GEAR 82 HANDLE NUT
61 DRAG WASHER 83 HANDLE RETAINER
62 DRAG 'D' WASHER 84 SCREW
63 SLEEVE
64 ONE WAY CLUTCH
65 GEAR SIDE COVER
66 WASHER