Remote Update - Miele G 7919 Operating Instructions Manual

Settings
Appliance list
Once you have activated the
SuperVision display, you can specify
which appliances in the Miele@home
network should be displayed on your
dishwasher. You can specify whether
the signal tones of those appliances
should be replicated by your
dishwasher.
 Select the required appliance.
 Select
Display this appliance
.
tones
 Select the setting you want and
confirm with OK
Appliance search
If you have connected your Miele
household appliances to your Wi-Fi
network via WPS rather than with the
Miele App, the appliances are not
automatically displayed in the appliance
list. You can include these appliances in
the list using the appliance search
function.
 Select
Appl. search
appliance search.
44
or
Buzzer
.
to start the

Remote Update

The RemoteUpdate menu option is
only displayed and can only be
selected if the requirements for using
Miele@home have been met (see
"Using for the first time -
Miele@home").
The RemoteUpdate function is used for
updating the software in your
dishwasher. If an update is available for
your dishwasher, it will automatically
download it. Updates will not be
installed automatically. They must be
initiated manually.
If you do not install an update, you can
continue to use your dishwasher as
usual. However, Miele recommends
installing updates.
Activating/deactivating
The RemoteUpdate function is
activated as standard. Available
updates will be downloaded
automatically but will only be installed if
you initiate the installation manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.