Nokia Flexi Multiradio BTS Technical-Operating Documentation page 56

RF Module and RRH Module LED indications
56
Table 19 RF/RRH Module unit status LED indications (Cont.)
Color
Green, stable
Stable Red for less than 5 seconds
and changes to Stable Yellow
Stable Red for less than 5 seconds The module is in the process of resetting
Periodic Red and Green
Blinking Colors (Red, Yellow, and
Green), each color stable for 500
ms
Table 20 RF Module fan/TX status LED indications
Color
Yellow, stable
Red, stable
Green, stable
Yellow
Color set according to fan
status, stable
Color set according to fan
status, blinking
The RRHs do not have fans, therefore, there is no Fan LED.
Table 21 2x40 W RRH TX Status LED
Color
Yellow, Stable
Green, Stable
18) Flexi BTS SM functionality that can help identifying faulty module.
Flexi Multiradio BTS Radio Module and Remote Radio
Indication
Software configuration is complete or
Supervisory: RF resources activated and transmission
is possible or
Working normally, no alarm on the RF Module
Switched ON, but the next conditions are not reached
yet
Antenna line device faulty/degraded
Module highlighting
Indication
O&M control is missing
All fans are faulty
All fans are working
A fan is not working
RF transmission is ON
RF transmission is OFF
Indication
O&M control missing
Transmission ON
DN0951745
Head Description
18)
Issue: 05