Advertisement
Quick Links
e-pill CADEX VibraPlus
www.epill.com
8 Alarm Vibrating Watch
1-800-549-0095
Quick Setup Guide
To switch between 24-Hour format and AM/PM format:
Tap ST/STP when the current time is shown
CLOCK – Set time & date (required)
1. The display should show the time & the day of the week. If not, tap MODE repeatedly until both are shown.
2. Press and hold LIGHT for 5 seconds until seconds digits in the box begin to flash. Then let go.
3. Tap MODE and the minutes will flash. Tap ST/STP to change the minute. Tap MODE to save.
4. The hours will now flash. Tap ST/STP to change the hour, note the AM/PM indicator. Tap MODE to save.
5. The date will now flash. Tap ST/STP to change the date. Tap MODE to save.
6. The month will now flash. Tap ST/STP to change the month. Tap MODE to save.
7. The year will now flash. Tap ST/STP to change the year. Tap MODE to save.
8. Tap LIGHT to confirm time & date.
Note: To temporarily display the date while in Time Mode, tap RESET.
ALARMS - Set alarms in chronological order starting with the earliest (required)
1. Tap MODE repeatedly until Alarm Mode is reached. "A1" is shown in the box.
2. Set Alarm 1, press and hold LIGHT until hour flashes. Tap ST/STP to change the hour. Tap MODE to save.
3. The minutes will now flash. Tap ST/STP to change the minute. Tap MODE to save.
4. Tap LIGHT to confirm Alarm 1 (A1).
5. Tap RESET to select a different alarm (A1-A8) and repeat steps 2 through 4 to set it.
6. Set alarm notification type. Tap ST/STP once for sound, twice for vibrate or three-times for both.
7. Tap MODE repeatedly to go back to Time & Date.
Note: To silence the alarm at alarm time, tap any button. We recommend tapping LIGHT.
Note: All alarms repeat automatically at the set time(s) the next day.
LOCK – Disable the buttons to prevent accidental reprogramming (optional)
1. The display should show the time & the day of the week. If not, tap MODE repeatedly until both are shown.
2. Press and hold MODE and RESET together at the same time.
3. "LOCK" will appear in the top left-hand corner of the display.
4. LIGHT button will still function but ST/STP, MODE and RESET buttons have now been locked and disabled.
Unlock: To unlock and enable all buttons hold MODE and RESET together at the same time. "LOCK" will now
disappear.
Answers to Frequently Asked Questions
1. Change the battery if the buttons stop working, the alarm is faint, or if the watch alarms/vibrates erratically.
2. Illumination: Tapping the LIGHT button only illuminates the digits (not the entire display). The function will
only be noticeable when in a very dark room. At all other times, even at low light, the display will be readable.
Advertisement
Related Manuals for E-Pill CADEX VibraPlus
Summary of Contents for E-Pill CADEX VibraPlus
- Page 1 CADEX VibraPlus www.epill.com 8 Alarm Vibrating Watch 1-800-549-0095 Quick Setup Guide To switch between 24-Hour format and AM/PM format: Tap ST/STP when the current time is shown CLOCK – Set time & date (required) 1. The display should show the time & the day of the week. If not, tap MODE repeatedly until both are shown.
- Page 2 Battery Change Instructions for Jewelers Please go to your local jeweler with these instructions Battery type CR2032 Remove the Unscrew all 4 backplate. The screws from the sound maker is backplate. adhered to its inner face. Leave the O-ring in place. Unscrew the Remove the old battery bracket...
- Page 3 (with 1. Tap MODE repeatedly until Alarm Mode is reached. “A1” the same or a similar model) at the manufacturer’s option. The e-pill CADEX will be shown in the box.
- Page 4 In no 12. Tap LIGHT to confirm countdown interval settings. event will e-pill, LLC be liable for loss of data or damages 13. Tap ST/STP to start the countdown (TR will begin to flash).
Need help?
Do you have a question about the CADEX VibraPlus and is the answer not in the manual?
Questions and answers
my watch is set on military time. how do i set on standard time