System Description Gynaecology/Urology Table 6300 Series; Description; Operation Range - STILLE 6300 Series Service Manual

System Description Gynaecology/Urology table 6300 Series

The Stille Sonesta 6300 Series tables are intended for Gynecology and/or Urology examinations and proce-
dures. An electric motor is used to adjust the height of the table. An electric motor (optional fixed) is used to
adjust the angle of the seat cushion. An electric motor (optional gas piston operated) is used to adjust the angle
of the back cushion. The motor for the back cushion has a quick release level for Trendelenburg like positioning.
The Stille Sonesta 6300-series are available with 120V 60 Hz or 230V 50 Hz transformers and hospital-grade
plugs. The transformer reduces the electrical voltage to the motors to 24V DC.
The table uses foot or hand controls (model dependant) to set the table and patient in the desired position, see
description of controls. For accessories, installed or delivered separately, see accessories list and installation.
1
2
3
4
5
6

Description

1. Back cushion.
2. Seat cushion.
3. Rissler leg rest.
4. Leg rest adjustment screw. Use hand screw to secure and to release.
5. Drainage receptacle container and holder.
6. Foot control (model dependant).
7. Adjustable paper roll holder.
8. Back cushion release handle. Push lever towards the cushion to release (model dependant).
9. Quick release (Trendelenburg like position). Push lever towards the cushion to release (model dependant).
10. Arm rest.
11. Arm rest adjustment screw. Use hand screw to secure and to release.
12. Locking mechanism for wheels.
13. Lever for adjusting the leg rest. Use lever to secure and to release. Pulling out the lever allows the lever
position to be changed.

Operation range:

7
8
9
10
11
12
13
6(56)