Advertisement
4.
OPERATION
4.1
Lifting a Drum
4.1.1
Turn the release valve (14) fully clockwise.
4.1.2
Move the drum loader to bring the bottom of the support frame (50) into contact with the drum.
4.1.3
Repeatedly depress the foot pedal (27) to raise the support frame so that the drum is between
the fulcrum assembly (47) and the lower part of the support frame.
4.1.4
Ensure that the drum rim is touching the top and bottom sections of the fulcrum assembly.
4.1.5
Push the drum loader against the drum rim, ensuring that the top and bottom claws of the fulcrum
assembly part and grip the top and bottom of the drum rim respectively. Refer to Fig. 4.
4.1.6
Continue depressing the foot pedal (27) until the drum is clear of the ground.
WARNING: Ensure that the drum position is as low as possible prior to moving the drum loader.
4.2
Transportation
4.2.1
Push or pull the drum loader, using the handle grips (52) to the required destination. Apply pressure
left or right to steer the drum loader.
CAUTION! Ensure that there are no obstructions in your path and make sure the floor surface is
suitable to take the weight of the fully laden drum loader.
4.3
Lowering and Releasing a Drum
4.3.1
To lower the drum, SLOWLY turn the release valve (14) anticlockwise and lower the drum until it
stands firmly on the ground. Refer to Fig. 5.
WARNING: To avoid damage to the drum loader or the drum, DO NOT turn the release valve (14) too rapidly.
4.3.2
Release the fulcrum assembly by lifting the top part of the assembly from the drum lip.
4.3.3
Pull the drum loader away from the drum.
5.
MAINTENANCE
5.1
Regularly check the drum loader chassis and wheels for rigidity. Ensure that the rear castor is
firmly secured to the chassis.
5.2
Regularly check the fulcrum assembly for wear. Replace if necessary.
5.3
Regularly check the drum loader's connecting components such as retaining pins, nuts and
washers for lubrication and/or wear.
5.4
Keep the handle grips free from grease and oil to prevent accidents.
6.
DECLARATION OF CONFORMITY
Declaration of Conformity
following standards and directives.
Hydraulic Drum Loader
Model DH03
93/68/EEC CE Marking Directive
98/37/EC Machinery Directive
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
We, the sole importer into the UK, declare that the product listed below is in conformity with the
The construction files for this product is held by the Manufacturer and may be inspected, by a
national authority, upon request to Jack Sealey Ltd.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 757500
01284 703534
Fig. 3
Fig. 4
Fig. 5
2nd August 2006
www.sealey.co.uk
Web
sales@sealey.co.uk
email
DH03 - 1 - 020806
Advertisement
