Pairing Bluetooth ® Device To Speaker; Care And Cleaning - Homewerks 7130-18-BT Manual

PAIRING YOUR BLUETOOTH
To play your personal music files, you need a wireless BLUETOOTH
connecting to the speaker. Follow the instructions that came with your BLUETOOTH
it to search for other BLUETOOTH
Optimal volume setting for the BLUETOOTH
BLUETOOTH Connection for One Switch Installation:
®
Your LED light, speaker and bath fan will be turned on by the
same switch:
1. After wiring the BLUETOOTH
switch, turn the power on. This will put the BLUETOOTH
of the bath fan into connecting mode.
2. From the home screen, choose settings > BLUETOOTH
search for the speaker.
3. Choose the Homewerks
™
if prompted.
4. When pairing is complete, use the BLUETOOTH
play audio from your device.
5. Disconnect the bath fan speaker from your mobile phone or
turn off the LED light, speaker and bath fan switch to turn off
the BLUETOOTH connectivity.
®
REMINDER:
• This fan does not include a switch.
• For one switch installation, the functions of the LED light, speaker, and fan will turn on and off together.
• For two switch installation, one switch controls the LED light and speaker, and another switch controls the fan.

CARE AND CLEANING

CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or
removing the fuse from the fuse box.
See safety information before proceeding. Routine maintenance should be done at least once a year.
• Never use solvents, thinner or harsh chemicals for cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse metal parts in water.
• Do not immerse resin parts in water more than 140°F.
• Do not immerse BLUETOOTH
WARNING: RISK OF ELECTRIC SHOCK!
Ensure the electricity to the wires you are working on is shut off.
Either remove the fuse or turn off the circuit breaker before
cleaning.
1. Remove the grille (B) by squeezing the mounting springs
and pulling the grille (B) down from the fan housing (A).
Disconnect the connectors to remove the grille (B) from the
fan housing (A). Remember to twist the ends of the gray
connectors to unlock them before pulling them apart. Wipe
grille (B) with a damp cloth.
Homewerks.com
DEVICE TO THE SPEAKER
®
accessories. This may involve entering a passkey or PIN (Personal Identification Number).
®
speaker is 70% or lower. Settings higher than 70% may cause sound distortion.
®
speaker of your bath fan to your
®
speaker. Enter the passkey or PIN
speaker to
®
speaker in water.
®
device. Set your device to a midrange volume before
®
BLUETOOTH
Your bath fan will be turned on by one switch and your LED light and
speaker will be turned on by a second switch:
1. After completing the wiring, turn on the switch that has been
speaker connected to the LED light and speaker. This will put the
®
BLUETOOTH
to 2. From the home screen, choose settings > BLUETOOTH
®
search for the speaker.
3. Choose the Homewerks
if prompted.
4. When pairing is complete, use the BLUETOOTH
play audio from your device.
5. Disconnect the bath fan speaker from your mobile phone or
turn off the LED light, speaker and bath fan switch to turn off
the BLUETOOTH
1
11 11
device to make it discoverable or to set
®
Connection for Two Switch Installation:
®
speaker of the bath fan into connecting mode.
®
speaker. Enter the passkey or PIN
™
connectivity.
®
to
®
speaker to
®