Download Print this page
Keg King King Junior Instruction Manual

Keg King King Junior Instruction Manual

20l pressure fermenter keg

Advertisement

Quick Links

FERMENTER
KING JUNIOR
INSTRUCTION MANUAL
Fermenter King Junior is a 20L Pressure
Fermenter and Keg capable of fermenting up to
18L of wort under pressure. Junior can also be
used as a gravity fermenter by attaching a blow
off tube or airlock. Junior comes from the same
tank mold as our King Kegs but utilises the clear
PET material of our 35L and 60L Fermenter King
Unitanks.
With crystal clear PET tank, the Fermenter King
Junior comes complete with a pressure lid fitted
with a pressure relief valve and stainless steel
ball lock gas and liquid posts.
The liquid ball lock post attaches to a silicone
diptube that floats internally on a stainless steel
float ball so you always pick up bright beer from
the top of the keg. Fermenter King Junior is a
great way to ferment Fresh Wort Kits.
20L PRESSURE FERMENTER KEG
It's relatively small size makes fermenting up to
18L of wort simple. Just attach a spunding valve
onto an MFL type gas disconnect (not supplied)
and you'll be able to control the internal pressure
of your fermenter. After fermentation, you can
carbonate your beer in the Fermenter King Junior,
attach it to your tap system or any hand held tap
and serve directly out of the fermenter.
Alternatively, you can easily transfer carbonated
beverages from Fermenter King Junior to kegs,
mini kegs and growlers.
This manual will provide users with information
regarding the safe operation, handling and
maintenance of the Fermenter King Junior.

Advertisement

loading
Need help?

Need help?

Do you have a question about the King Junior and is the answer not in the manual?

Questions and answers

Summary of Contents for Keg King King Junior

  • Page 1 Fermenter King Junior. float ball so you always pick up bright beer from the top of the keg. Fermenter King Junior is a great way to ferment Fresh Wort Kits.
  • Page 2 WARNINGS Clean wash and sanitise the tank at pressure release valve (PRV) pre-set temperatures below 50°C (122F). Do not to below 2.4 bar (35 psi). fill the tank with wort or liquid above 50°C Use only the RED pressure release (122F) valve supplied by MCH Australia Pty Cleaners must be diluted to suitable...
  • Page 3 PRODUCT IMAGE DETAILED Place bung inside of tank.
  • Page 4 FERMENTATION TIPS Fermenting beverages under pressure tube attached to the float ball inside the provides brewers with the ability to reduce tank. You are now able to hold pressure unwanted esters and speed up fermentation within your tank while releasing excess times with the capacity to ferment at higher pressure.