Kia Carnival 2007 Workshop Manual page 894

3. Install the snap pin.
4. Adjust the brake pedal height and free play.
Before connecting trans cable, be sure that position of pivot pin (A) is initializen.
5. Install the stop lamp switch.
INSPECTION
1. Check the bushing for wear.
2. Check the brake pedal for bending or twisting.
3. Check the brake pedal return spring for damage.
4. Check the stop lamp switch.
(1) Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when
the plunger of the stop lamp switch is pushed in and when it is released.
(2) The stop lamp switch is in good condition if there is no continuity when plunger(A) is pushed.