How To Charge The Power Bank - OUTXE PCPB10000WS User Manual

How to Charge the Power Bank

Connect the power bank to a charger (Output: DC 5V 0.5A~3A),
using the supplied USB charging cable. All indicators will stay lit
when the charging is finished.
Notes
If your charger output current is between 2A and 3A, a full
charge may take 6-7h. If the output current is under 2A, the
charging time will increase accordingly.
Simply leave the PCPB10000WS in the sunlight for solar
charging, there's no need to press any buttons. Whencharging
begins, the last indicator turns RED. It takes about 35 hours to
get a full charge due to the limited solar panel size and
conversion rate. Solar charging is recommended for emer-
gency use only. Please fully charge your unit
from a wall outlet before going outdoors.
When the fifth indicator flashes or illuminates, the battery is too
active. Please don't place the power bank in the sun to charge,
if you do, you may damage the battery.
- 3 -