Operation Instructions
Caution: The suction hole opening must be open and free of any
obstructions at all times. Otherwise, the motor will overheat and can
be damaged.
Power switch
• Switch button (Fig 5)
• Press one time: the vacuum cleaner will turn on
• Press again: the vacuum cleaner stops
Using the unit as an upright vacuum
• Insert the handle into the supporting plate;
• Connect the brush.
Using the unit as a hand-held vacuum
• Press the handle lock and pull out the body from the supporting plate.
You may choose to leave the crevice tool or floor brush
Note:
attached to the hand vacuum when operating as such.
Fig 5
Switch Button
9
Need help?
Do you have a question about the TM-SAV31D and is the answer not in the manual?
Questions and answers