Cleaning Method - Lenovo Robotic User Manual

Operating Instructions
Clean/Pause
Method 1: After the power is turned on,short press the power
key on the main unit to start cleaning(press any key to
pause while cleaning)
Method 2: Click the Sweep in the APP to start cleaning (press
the pause key to pause the current task)
Note:
•
Robot vacuum cleaner cannot be used to clean liquids.
•
When battery Is lower than 30%, the Robot will automatically return
to the charging dock After the battery reaches 80%, the Robot will stop
the charging itself and start the cleaning again.
•
Please remove all types of wire (including the power cord of the
charging dock) on the floor before cleaning because dragging from the
worked machine can cause a power failure and damage items or wire.
Method 1
Method 2
10

Cleaning method

After startup, the robot will scan to generate maps and
intelligently create areas. In these areas, the cleaning paths
are planned as along the wall firstly, followed by the
bow-shaped filling method. The cleaning in each area will be
accomplished step by step with high efficiency and full
coverage. After the cleaning is completed, Robot will
automatically return to harging dock to recharge itself.
Note: Please don't move Robot frequently. Please place the device
near the original place if you move it manually. Robot will try to
reposition its coordinates when it is started again. If the positioning is
successful, Robot will continue to work according to the planned
clean path. If the positioning fails, Robot will give up the current task
and re-create the map and may not be able to complete the recharge.