Wall Mounting Warnings And Cautions; Wall Mounting With Sky Bracket; Wall Mounting With A 3Rd Party Bracket - Sky glass Setup Manual

Wall mounting
warnings and
cautions
• You must use a professional
installer to wall mount Sky Glass.
• You will need at least two people
to carry out the installation.
• Check your fixings match the wall
type to which you are mounting.
Wall mounting
with Sky
bracket
Wall mounting
with a 3rd party
bracket
You may need to remove the stand from the back of your TV to access the VESA screw mounting holes.
1. Using the Allen key provided,
undo and remove the four
screws on the back cover.
Follow your 3rd party wall mounting bracket setup instructions. Once in position, follow the steps overleaf to enjoy Sky Glass.
X41G78SV15601 A
• If it's not fully secure, your Sky
Glass could fall causing personal
injury or even death, and damage
to the TV and anything nearby.
• Sky Glass must be installed near
a mains supply wall socket, which
should be easily accessible. If the
mains supply socket is hidden
behind the TV panel then the
socket will need to be recessed
into the wall and a separate
power isolation switch must be
• Simply follow the step-by-step
instructions on the wall mounting
template provided.
• Your professional installer should
make sure the wall bracket,
screws and spacers are suitable
for the size, length and weight of
your Sky Glass and compatible
with the surface to which the
Sky Glass is to be affixed.
2. Carefully lift the TV off the stand
and place it screen up on a soft
surface (you will need two people).
fitted and be easily accessible.
This work should be carried out
by a qualified electrician.
• Sky Glass is designed and
intended to be mounted and/or
installed only by a professional
installer and to the fullest
extent permissible under law
Sky excludes all liability for any
injury and/or damage caused by
incorrect and/or non-professional
installation or assembly.
TV weight without stand
• 43" 14kg
• 55" 23kg
• 65" 28kg
Additional kit you need
• Drill and drill bit
• Screwdriver or spanner
• Hammer
• Spirit level
• Appropriate wall fixings
• Your professional installer
should also ensure that the
surface to which the Sky Glass
and any bracket and fixings are
to be attached is suitable and
can withstand its load. If the
mounting and/or installation work
is not carried out in the correct
manner, there is a risk of injury
and/or damage to your TV and/or
other objects.
3. Remove the four white internal
spacers from the back of the TV.
© Sky group of companies 2021.
Sky and Sky Glass are trade marks owned by
the Sky group of companies.
This product is exclusively for use in the UK,
Channel Islands, Isle of Man and Republic of
Ireland and must only be used indoors.
SKY CP LIMITED, GRANT WAY, TW7 5QD UNITED KINGDOM
PKG-001406-00 Rev.3 July 2021