Page 1
User Manual Heavy Duty Pitot Tube Anemometer and Differential Pressure Manometer Model HD350 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
Page 2
Introduction Congratulations on your purchase of the Extech HD350. This handheld meter measures and displays air velocity (speed), air flow (volume), ambient air temperature, and gauge/differential pressure. This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.
KEYPAD NOTE: In Setup mode several buttons have special uses not detailed above but are described in subsequent sections of the manual. NOTE: Battery Compartment, Tilt Stand, and Tripod Mount are located on the reverse side of the meter. HD350-en-GB_V3.4 2/19 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
16. REC, MAX, MIN and AVG indicators 17. Temperature units for the primary display 18. Units of measure for air flow 19. Temperature units for the secondary display 20. Secondary display (Temperature) HD350-en-GB_V3.4 2/19 GlobalTestSupply www. .com Find Quality Products Online at:...
3. Use the arrow keys to scroll to the desired setting. 4. Press the AVG REC button to store the new setting in memory. Note: The Setup mode is disabled when the meter is in the MIN-MAX-AVG mode. HD350-en-GB_V3.4 2/19 GlobalTestSupply www.
Page 6
15. Edit the Height value in the same manner as the Width value. 16. Press the AVG REC button to store the Height value. 17. Press and hold the SETUP display icon will switch off. HD350-en-GB_V3.4 2/19 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
Page 7
3. Press the AVG REC 5. Press the AVG REC button to save the setting. 6. Press and hold the SETUP display icon will switch off. HD350-en-GB_V3.4 2/19 GlobalTestSupply www. .com Find Quality Products Online at:...
Page 8
6. Press the AVG REC button to clear the selected reading types. The meter will beep indicating that that the delete process was successful. 7. Press and hold the SETUP display icon will switch off. HD350-en-GB_V3.4 2/19 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
Page 9
With the Pitot tube open to ambient conditions press and hold the HOLD ZERO button for 2 seconds to zero the display. Put the mouth of the Pitot tube in the direction of the oncoming air mass under test and read the Air Velocity measurement value on the LCD. HD350-en-GB_V3.4 2/19 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
1. Press the HOLD ZERO button to freeze the presently displayed reading on the display. The display will show the HOLD icon while in the Data Hold mode. 2. Press the HOLD ZERO to real time operation. HD350-en-GB_V3.4 2/19 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
Page 11
Storing, Recalling, and Averaging Readings The HD350 can store up to 99 readings in its internal memory for each of the three measurement modes (Air Velocity, Air Flow, and Pressure) for a total of 297 readings. Momentarily press the SAVE CLEAR button to store a reading. When the internal memory is and beep when another reading is attempted to be stored.
USB PC Interface and Software The HD350 is equipped with a USB communication jack on its upper left side. The supplied communications cable connects to this jack and to a USB port on a PC. Check the software download page of the website software for the latest version of the PC software.
Need help?
Do you have a question about the HD350 and is the answer not in the manual?
Questions and answers