Sealey VSE5006.V2 Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instructions protection
1. SAFETY
WARNING! Wear approved eye protection. Wear appropriate Personal Protective Equipment. A full range of Personal Protective
‰
Equipment is available from your Sealey stockist.
WARNING! Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to when
‰
using tools.
DO NOT use tools if damaged.
8
Maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.
9
Ensure that a vehicle that has been raised by a jack is adequately supported. Use axle stands.
9
DO NOT attempt to start or move a vehicle whilst in gear and with timing devices fitted.
8
Wear suitable clothing to avoid snagging. DO NOT wear jewellery. Tie back long hair.
9
Account for all tools, parts and components being used. DO NOT leave these in or near the engine. Return tools to suitable storage
9
after use.
When not in use, store in a safe, dry childproof place.
9
Keep children and unauthorised persons away from the work area.
9
IMPORTANT! These instructions are provided as a guide only. Always refer to the vehicle manufacturer's service instructions
or a proprietary manual to establish the correct procedure and data.
WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations. The Operator /
‰
user must apply caution and common sense (good practical sense).
When timing an engine, always prevent the engine from being turned over. Use a notice and / or inhibit the engine.
9
WARNING! Incorrect or out of phase camshaft timing can result in contact between the valve head and the piston crown. This will cause
‰
damage to the engine.
2. INTRODUCTION
Comprises camshaft setting tools and belt tensioner locking pins.
Suitable for timing applications on all 1.4, 1.6 and 1.8 Twinport
petrol engines with belt drive. Supplied in a storage case with
instructions and a warning tag.
3. CONTENTS
Item Part No.
1 VSE5006-01
2 VSE5006-02
3 VSE5006-03
4 VSE5006-04
5 VSE5006-05
6 VSE5006-06
© Jack Sealey Limited
TIMING TOOL KIT - ALFA ROMEO, FIAT, GM,
SAAB - 1.4, 1.6, 1.8 TWINPORT - BELT DRIVE
MODEL NO:
Description
Auxiliary Belt Tensioner Locking Pin
Flywheel Holding Tool
Timing Belt Tensioner Locking Pin
Camshaft Sprocket Locking Tool
Camshaft Setting Plate
Flywheel Holding Tool
Original Language Version
VSE5006.V2
2
4
OEM Part Number
Vauxhall/Opel Chevrolet/
Saab
KM-6349/KM-6130 EN-6349
KM911 -
KM-6333 EN-6333
KM-6340 EN-6340
KM-6628-A -
KM-6625 EN-6625
5
Alfa Romeo/
Fiat
-
-
-
2.000.012.100
2.000.012.000
2.000.012.800
VSE5006.V2 Issue 1 20/04/21
1
6
3