Hide thumbs Also See for LM-150-24-G1T2:

Advertisement

Quick Links

Intelligent LED Driver
Small size and light weight. Adopt SAMSUNG/COVESTRO V0 flame
resistant polycarbonate protective housings.
The clamshell design and screwless type for strain-relief. The design
of dismountable end cap allows you to adjust the length of housing
depending on your needs.
With soft-on and fade-in dimming function, enhancing
your visual comfort.
The whole dimming process is flicker-free with high
frequency exemption level.
Dimming from 0~100%, down to 0.1%.
Support Leading edge (Triac), Trailing edge (ELV)
and Push DIM.
The secure and reliable design for signal isolation.
Innovative thermal management technology
intelligently protects the power life.
Overheat, over voltage , overload, short circuit
protection and automatic recovery.
Suitable for indoor light applications ofⅠ/Ⅱ/Ⅲtype.
Up to 50,000-hour life time.
5-year warranty (Rubycon capacitor).

Technical Specs

Model
Output Voltage
Output Voltage Range
Output Current

Output Power
Output Power Range

OUTPUT
Strobe Level
Dimming Range
Overload Power Limitation
Ripple
PWM frequency
Dimming Interface
Input Voltage
Frequency
Input Current
Power Factor
INPUT
THD
Efficiency (typ.)
Inrush Current
Anti Surge
Leakage Current
Working Temperature
Working Humidity
ENVIRONMENT
Storage Temperature,Humidity
Temperature Coefficient
Vibration
Overheat Protection
Overload Protection
PROTECTION
Short Circuit Protection
Overvoltage Protection
Withstand Voltage
Isolation Resistance
Safety Standards
SAFETY
&
EMC
EMC Emission
EMC Immunity
Strobe Test Standard
Gross weight(G.W)
Dimensions
OTHERS
Package size
Carton Size
The driver is suitable for connecting resistor current-limiting LED fixture (e.g. LED strip). The inrush current will be dozens of times increased if connecting built-in constant current IC current-limiting LED fixtures, the driver will activate the
overloaded protection (hiccups flickering). When you order, please remark controlling the constant current LED fixture (e.g. MR16 lamp, underground light, LED wall washer, constant current LED strip, etc.), so that we can prepare them with
special procedures.
(
Constant Voltage)
Flicker-free
IEEE 1789
Achieve the exemption level.
The certification icon only represents that the product is in the process of this series of certification applications, certification qualifications to the product shall prevail.
Triac/ELV
Push DIM
LM-150-24-G1T2
24Vdc
24Vdc±0.5Vdc
Max. 6.25A
Max. 150W
0~150W
High frequency exemption level
0~100%, down to 0.1%
≥102%
≤200mV
3600Hz
Triac/ELV, Push DIM
220-240Vac
50/60Hz
≤0.75A/230Vac
PF>0.98/230Vac (at full load)
THD<6%@230Vac (at full load)
91%
Cold start 45A/230Vac
L-N: 2KV
Max. 0.5mA
ta: -20~50°Ctc: 90°C
20~95%RH, non-condensing
-40~80°C, 10~95%RH
±0.03%/°C(0-50°C)
10~500Hz, 2G 12min/1cycle, 72 min for X, Y and Z axes respectively
Intelligently adjust or turn off the output current if the PCB temperature ≥110°C, and recover automatically
Shut down the output when current load≥102%, and recover automatically
Enter hiccup mode if short circuit occurs, and recover automatically
Shut down the output when non-load voltage≥28V, and recover automatically
I/P-O/P: 3750Vac
I/P-O/P: 100MΩ/500VDC/25°C/70%RH
CCC
China
GB19510.1, GB19510.14
Germany
TUV
EN61347-1, EN61347-2-13, EN62493
CB
CB member states
IEC61347-1, IEC61347-2-13
EN61347-1, EN61347-2-13, EN62384, EN61547
CE
European Union
KC
Korea
KC61347-1, KC61347-2-13
EAC
Russia
IEC61347-1, IEC61347-2-13
RCM
Australia
AS61347-1, AS61347-2-13
Europe
EN61347-1, EN61347-2-13, EN62384
EMEC
China
GB/T17743, GB17625.1
CCC
CE
European Union
EN55015, EN61000-3-2, EN61000-3-3, EN61547
KC
Korea
KN15, KN61547
EAC
Russia
IEC62493, IEC61547, EH55015
RCM
Australia
EN55015, EN61000-3-2, EN61000-3-3, EN61547
EN61000-4-2,3,4,5,6,8,11, EN61547
IEEE 1789
430g±10g
352×43×30mm(L×W×H)
355×44×33mm(L×W×H)
370×340×93mm(L×W×H) 20pcs/ctn 9.4kg±5%/ctn
WM
0.1
Digital
Dimming
Over Temp.
Dimming
Dept
Protection
LM-150-12-G1T2
12Vdc
12Vdc±0.5Vdc
Max. 12.5A
90%
Shut down the output when non-load voltage≥16V, and recover automatically
1
Triac/ELV
LM-150-24-G1T2
LM-150-12-G1T2
Push DIM
Class 2
Short Circuit
Over Load
Protection
Protection
V
Over voltage
protection
www.ltech-led.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LM-150-24-G1T2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ltech LM-150-24-G1T2

  • Page 1 Triac/ELV LM-150-24-G1T2 LM-150-12-G1T2 Push DIM Intelligent LED Driver Constant Voltage) Small size and light weight. Adopt SAMSUNG/COVESTRO V0 flame resistant polycarbonate protective housings. The clamshell design and screwless type for strain-relief. The design of dismountable end cap allows you to adjust the length of housing depending on your needs.
  • Page 2 Triac/ELV LM-150-24-G1T2 LM-150-12-G1T2 Push DIM Product Size Unit: mm Wiring Diagram Triac Connection Wire diameter: 0.75-1.5 (20-16AWG) Wire diameter: 1.5-2.5 (14-12AWG) TRIAC Strip length: 8-9mm Strip length: 6-7mm 0~100% dimming range Push DIM Connection Push DIM 0~100% dimming range Push Dim is invalid under DC voltage input.
  • Page 3 Triac/ELV LM-150-24-G1T2 LM-150-12-G1T2 Push DIM Protective Housing Application Diagram Tension plate Remove the protective housing Push the tension plate down to fix the electric wires. Push the side plate outwards and remove the tension Pull the housing left and right from the bottom to remove it.
  • Page 4 No any contract signed by LTECH. 1. Repair or replacement provided is the only remedy for customers. LTECH is not liable for any incidental or consequential damage unless it is within the law. 2. LTECH has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.
  • Page 5 Available from: Sales & Technical Support: Bright Green Connect Limited Unit 3, Oyster Park Byfleet Surrey KT14 7AX  +44 (0) 1932 497992  contact@brightgreenconnect.com  brightgreenconnect.com...

This manual is also suitable for:

Lm-150-12-g1t2

Table of Contents