Nokia 7088 Disassembly/Assembly
Hide thumbs
Also See for 7088:
- User manual (94 pages) ,
- Troubleshooting manual (44 pages) ,
- Troubleshooting manual (6 pages)
Related Manuals for Nokia 7088
Summary of Contents for Nokia 7088
- Page 1 Nokia Customer Care 7088 (RM-219) Mobile Terminal Disassembly/Assembly Issue 1 03/2007 Company Confidential © 2007 Nokia Corporation...
- Page 2 7088 (RM-219) Disassembly/Assembly Contents Page Safety Information ....................3 ESD Protection....................3 Assembly Instructions ....................4 Disassembly Instructions..................4 Page 2 © 2006 Nokia Corporation Company Confidential Issue 1 06/2006...
-
Page 3: Qualified Service
(5) All ESD-sensitive parts must be packed in metallized protective bags during shipping and handling outside any ESD Protected Area (EPA). Be especially careful to avoid contaminating the mobile terminal with any dust during assembly. Issue 1 06/2006 © 2006 Nokia Corporation Company Confidential Page 3... - Page 4 SRT-6 1. Tools for disassembly and reassembly. 2. Protect the main display surface with a film. 3. Press and slip off Battery Cover. 4. Pull upward to remove Battery. Page 4 © 2006 Nokia Corporation Company Confidential Issue 1 06/2006...
- Page 5 C-cover and D-cover, moving along with using torque driver, set torque to 10Ncm @ perimeter, and lever the snaps to separate 700 rpm. The tolerance is +/-2Ncm. C-cover and D-cover. Issue 1 06/2006 © 2006 Nokia Corporation Company Confidential Page 5...
- Page 6 Torx screws 11. Remove the screw sponge from B-cover. (M1.4x3). When using torque driver, set torque to 10Ncm @ 700 rpm. The tolerance is +/-2Ncm. Page 6 © 2006 Nokia Corporation Company Confidential Issue 1 06/2006...
- Page 7 16. Remove PCB from D-cover. When using torque driver, set torque to 10Ncm @ 700 rpm. The tolerance is +/-2Ncm. 17. Disconnect FPC from PCB. 18. Gently remove camera module by hand. Issue 1 06/2006 © 2006 Nokia Corporation Company Confidential Page 7...
- Page 8 24. Use a TORX 4IP screw driver to loosen and remove the four Torx screws (M1.4x2). When 23. Remove speaker by tweezers. using torque driver, set torque to 10Ncm @ 700 rpm. The tolerance is +/-2Ncm. Page 8 © 2006 Nokia Corporation Company Confidential Issue 1 06/2006...
- Page 9 26. Pull out the sheet metal gently by hand using torque driver, set torque to 10Ncm @ 700 rpm. The tolerance is +/-2Ncm. 27. Remove side keys by tweezers. Issue 1 06/2006 © 2006 Nokia Corporation Company Confidential Page 9...