Table of Contents
Advertisement
Chapter 2
Basic Setup
This chapter provides details on how to setup the IP3442M
Front Panel
1. Power/WAN
(Green/Red)
2. WiFi/ WPS LED
(Blue/Green)
3. LAN LED (Green)
Figure 1: Front Panel
Red On, Green off – No internet.
Blink Red,Green off - The Power LED will blink(Red)
during boot up
Green On, Red off-Internet connection is available.
Interleave Red and Green-FW upgrade
Off - No power.
Green On-Wireless enable.
Green off-Wireless disable
Blue Slow blink, Green off - WPS is pairing. When
WPS button is pressed, the LED will be blinking for 2
minutes.
Blue Off - WPS feature is not in use.
Blue On - WPS failure. Keep light for 10 seconds
Blue off,Green off-During boot up
On (Green) - LAN connection is available.
Off - LAN is not connected.
Blinking-The traffic is running
2
2
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IP3442M and is the answer not in the manual?
Questions and answers
is there a way to do port forwarding on this router website?
how do i block a device from connecting?
How do I block someone from using my wifi?
To block a user from accessing your Sercomm IP3442M WiFi, follow these steps:
1. Connect your PC to the router using an Ethernet cable.
2. Open a web browser and enter http://192.168.1.1 in the address bar.
3. Log in using the username "admin" and the WPS PIN as the password (found via QR code on your WiFi credential card).
4. Go to the Wireless page and click on Basic Setup.
5. Change your WiFi name (SSID) and password to prevent unauthorized access.
6. Save the settings and restart the router if necessary.
This will disconnect all connected devices, and only users with the new password can reconnect.
This answer is automatically generated
how to change password on ip3442m-L/us
To change the password on the Sercomm IP3442M:
1. Ensure the WiFi router is on and working.
2. Connect your PC to the router using an Ethernet cable.
3. Open a web browser and go to http://192.168.1.1.
4. Enter the username (admin) and the password (WPS PIN from the WiFi credential card).
5. Navigate to the Wireless page.
6. Click Basic Setup and update your WiFi name and password.
This answer is automatically generated