Panasonic PAW-160MAH2L Installation Instructions Manual page 27

Control functions provided as standard by integral components
CZ-RTC5B / CZ-RTC6BL remote controller
● Operation-ON/OFF
● Mode selection
● Temperature setting
● Parameter settings
TR-16 / TR-16e Additional Thermostat (advanced version only)
● Target temperature setting based on ambient temperature with proportional integral
logic*
● Demand control based on room supply air temperature to enhance comfort and
efficiency*
* Only one of these two options can be chosen at a time.
CZ-CAPBC2 Mini seri-para I/O unit (medium and advanced versions only)
● Easy integration in external AHU control systems and BMS
● Demand control: 40 to 115 % (5 % steps) of nominal current by 0–10 V input signal
● Target temperature setting by 0–10 V or 0–140 Ω input signal
● Suction air temperature (TA sensor) output by 4–20 mA signal
● Mode select and/or ON/OFF control
● Fan operation control
● Operation status output/ Alarm output
● Thermostat ON/OFF control
1 Demand control by external BMS cannot be combined with the demand control or target temperature setting accom-
plished by the thermostat. However, if simultaneous demand control and target temperature setting is needed, this can
only be achieved by using a second (optional) CZ-CAPBC2 interface.
2 Mode select and/or ON/OFF control cannot be combined with fan operation control nor Thermostat ON/OFF control.
However if simultaneous control of 2 options is needed, this can be achieved by using a second (optional) CZ-CAPBC2
interface. All 3 options cannot be used at the same time.
AHU Kit – Installation Instructions – 09/2021
> Medium version: Terminals M2-3, M2-4.
Advanced version: Terminals M2-1, M2-2 in case of using TR-16e; Terminals
M2-3, M2-4 without using TR-16e.
> Medium and advanced versions: Terminals M2-3, M2-4.
> Medium version (MAH2/PAH2 generation): Terminals PT9, PT10;
medium version (PAH3 generation): Terminals M2.1, M2.2.
Advanced version only, directly on CZ-CAPBC2 interface: Terminals 1, 2.
> Medium and advanced versions: Terminals DI1, DI2, DI3, COM.
2
> Medium and advanced versions: Terminals DI1, DI2, DI3, COM.
> Medium and advanced versions: Terminals COM, DO1 / COM, DO2.
2
● Medium and advanced versions: Terminals DI1, DI2, DI3, COM.
1
2
Product description
1
27
3