Configuring The License Level - Cisco Catalyst 9200 Configuration Manual

Configuring the License Level

Command or Action
Step 17 copy running-config startup-config
Example:
Device# copy running-config startup-config
Configuring the License Level
This procedure is optional. You can use this procedure to :
• Downgrade or upgrade licenses.
• Enable or disable an evaluation or extension license
• Clear an upgrade license
The required license level(s) needs to be configured on the device before registering. The following are the
license levels available for Cisco Catalyst 9000 Series Switches:
Base licenses
• Network Essentials
• Network Advantage (includes Network Essentials)
Add-on licenses—These can be subscribed for a fixed term of three, five, or seven years.
• Digital Networking Architecture (DNA) Essentials
• DNA Advantage (includes DNA Essentials)
To configure the license levels, follow this procedure:
SUMMARY STEPS
1. enable
2. configure terminal
3. license boot level license_level
4. exit
5. write memory
6. show version
7. reload
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
98
Purpose
(Optional) Saves your entries in the configuration file.
Purpose
Enables privileged EXEC mode.
Enter your password, if prompted.
Configuring Smart Licensing