Boyd S2601 Product Information Manual page 10

When transporting the chair:

Chair base must be in full down position, tilt down and the chair back must be in full up position (Home Position).

Chair frame must be secured to the chair base.

Remove the chair power cord.

Secure or remove dental light and any accessories.

Move equipment by gently tilting it on the side edge of the floor plate by lifting on under side of seat only enough to be able
to slide onto proper moving equipment. Do not use back section or seat upholstery to lift or move chair. Never attempt to
move chair alone and always use proper lifting techniques to avoid physical injury.

Chair should be secured to transporting equipment and/or transporting vehicle.

Transporting and Storage Temperatures for chairs to be kept between Temperature: -10
Disposal of Boyd equipment:
Boyd chairs are designed and built to last and provide efficient and safe service for many years. The expected service life of this
chair is 15 years. When the time finally comes to retire the chair, please dispose of the equipment according to statutory and
regulatory requirements. Circuit boards and electrical cabling should be recycled as electrical salvage. Plastic parts should be re-
cycled accordingly. Any material unsuitable for recycling should be disposed of appropriately.
About Your Chair (continued)
Transporting of Chair
Disposal of Equipment
10
° ° °
C TO 50 C (14 F TO 122
°
F).
SCHM-001
Rev 2