Island Recognition - Canon BESTEM-D01/R Recognition Setting

BESTEM – D01R

3. Island Recognition

When island recognition button in recognition main screen is clicked, the below screen will be displayed and
island recognition teaching can be done. Set in ①～③ sequence. Set AgP recognition setting screen as
procedure in island recognition screen. (Explanation will be abbreviated here).
Basic screen and basic operation is as chip recognition.
⑤
③
※
①
Tab items
Set each Island base（ 「Pf base」 for Pf recognition）, Template, NG mark detect item. Setting procedure for each
item is at the following page.
②
Apply button
Saves set parameter. If Return is clicked without clicking Apply button first, setting will return to previously
saved setting.
③
REC exe button
Carry out trace position recognition. Check if the parameters are correct.
④
Adjust exe button
Execute island positioning recognition. Island position will be compensated.
⑥ ⑦
④
①
②
P．10