Advertisement
How to Configure Yealink T58:
To begin configuring your Yealink for use on Intermedia's network, you will need to pull up the graphical
user interface. To locate the IP address from the phone screen, use the following steps:
1) Swipe down from the top of the phone screen
2) Tap on the "Settings" icon.
3) The first section of options will be "Status", tap on the Network option.
4) Line 1 will read "IPv4 Status," tap on this. The phone's IP address is on the next screen.
You will then be presented with a screen that looks like this:
You will now need to navigate to the Account Page. You will need to enter in the SIP configuration
information for your AnyPhone device on this page. These credentials can be found in your Hostpilot
Account. The User Name and Server address will be whatever is found in your SIP Configuration for this
device.
Advertisement
Table of Contents
Related Manuals for Yealink T58
Summary of Contents for Yealink T58
- Page 1 How to Configure Yealink T58: To begin configuring your Yealink for use on Intermedia’s network, you will need to pull up the graphical user interface. To locate the IP address from the phone screen, use the following steps: 1) Swipe down from the top of the phone screen 2) Tap on the “Settings”...
- Page 2 The Label and Display Name fields will be your Ext information. It will look like this when completed: After you have it looking like this, press the confirm button. The device will then attempt to register. Now your device is registered! However, there is a little more configuration that needs to be completed: Navigate to Accounts >...
- Page 4 Please also remember to set the codec to that which is defined with you SIP credentials in the HostPilot portal. See the below Image, currently we only support G.729 and G.711u codecs. You will need to remove any other codecs listed in the “Enabled Codecs”.
- Page 5 Next, go to Network > Advanced, and make these changes: - Voice QoS = 46 - SIP QoS = 46 - Maximum RTP Port = 50000 - Minimum RTP Port = 30000...
- Page 6 Setting the Line Keys The Yealink T58A is a 27 line phone with each key having 29 individual options. It is expected that the customer would like a fair amount of line keys set to the standard “Line” option. Almost there! Next, go to Phone > Preferences, and make the following change...
- Page 7 Now to configure the forwarding options, which is the phone’s direct number, not numbers that forward to the phone. Go to the Features > Forward & DnD. -Busy Forward > Target: enter the extension/user DiD -No Answer Forward > Target: enter the extension/user DiD...
Need help?
Do you have a question about the T58 and is the answer not in the manual?
Questions and answers