Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Amico GoLift
Summary of Contents for Amico GoLift
- Page 1 Installation and Operation Instructions GoLift Patient Lift (400 lbs & 700 lbs)
-
Page 2: Table Of Contents
Lifting Sling Working with the Amico GoLift Attaching the Lifting Sling Lifting to and from Lying Position in Bed Installing the GoLift in the Amico PLP Track 13-14 Lift Attachment/Detachment Connecting the Carry bar to the Strap Connecting the Hand Control to the Carry bar or Wall Plate... - Page 3 25-26 GoTrack Configuration Environmental Conditions 26-27 References on the Package Electro-Magnetic Compliance Data for Amico GoLift 27-30 Guidance and Manufacturer’s Declaration - Electromagnetic Emissions 27-29 Recommended Separation Distances Between Portable and Mobile RF Communications Equipment and the Equipment or System...
-
Page 4: Introduction
700 lbs (318 kg) The Amico GoLift is a fixed lift and can be installed in a variety of track profiles (the trolley can be customized to fit these track profiles) and it also works seamlessly with the Amico GoLift Pendant (PLP) System. -
Page 5: Symbols Used In This Manual
WARNING: This symbol is intended to alert the user of hazard or unsafe practices, which could result in serious bodily harm. MARKINGS The GoLift 400 and GoLift 700 are designed to comply with the following Standards: CAN/CSA-C22.2 No. 60601-1:08 Medical Electrical Equipment – Part 1: General requirements Standard(s): for basic safety and essential performance. -
Page 6: Safety Instructions
• Contents of this manual are subject to change without prior notice to users. Keep for future reference. • Never place the Amico GoLift, track/PLP and sling(s) in control of a person who has not been properly trained in the use and care of this equipment. -
Page 7: Technical Specifications For Amico Golift
Technical Specifications for Amico GoLift Specifications & Listings Three GoLift Weight Capacities Single Lift Lift Up to 400 lbs / 181 kg GO-LIFT-400 Single Lift Lift Up to 700 lbs / 318 kg GO-LIFT-700 Lift Up to Tandem Lifts GO-LIFT-1000... -
Page 8: Anatomy Of The Golift
Anatomy of the GoLift Quick release Achieve instant electrical and Quick change mechanical connection battery design Lifts up to GoLift weighs 700 lbs! just 10 lbs Bright LED indicators Durable all metal gears Constructed of solid steel Quick magnetic hand... -
Page 9: Technical Specifications Of Power Traverse
Amico track system with the press of a button. The power traverse is compatible with all models of the GoLifts. The power traverse trolley has a cable that plugs into the GoLift in order to draw power from the GoLift battery. The GoLift batteries power the motors within the trolley in order to move the assembly laterally within the track. -
Page 10: How To Operate
Trolley. Ensure that the lift is clipped in with the wire side of the Trolley on the side of the lift with the open connection as shown. Connecting Wire Latch Locking Screws Quick Release System QUICK RELEASE SYSTEM Amico Mobility Solutions Corporation... -
Page 11: Part Number
The power turntable is a motorized turntable that works with the GoLift to rotate a patient between tracks. The power turntable uses GoLift batteries to power a motor located in the side of the turntable in order to rotate the track. -
Page 12: Basics In Transferring A Patient
Attention can be fully focused on the user’s functional level and the caregivers technique. To use the GoLift correctly, the patient should only be lifted to the extent that she/he is clear of the surface and should be moved at this height. -
Page 13: Lifting To And From Lying Position In Bed
Installing the GoLift in the Amico PLP Track 1. Remove both the end caps on the PLP Arm. -
Page 14: Lift Attachment/Detachment
6. Fasten all end stops tightly using an adjustable wrench. NOTE: If you are installing the Amico GoLift in an existing track system you must ensure that the max load of the track system is equal or higher than the max load of the Amico GoLift. -
Page 15: Connecting The Carry Bar To The Strap
Installing the Endstop on the Amico Track 1. Use a 3/16" Allen key to secure the endstop to the track. Amico Track Endstop Connecting the Carry Bar to the Lift Strap 1. Hold the Carry Bar and press the button using the thumb as shown. -
Page 16: Operating The Golift
Operating the GoLift The Amico GoLift is switched on automatically when a button on the hand control is pressed. The Amico GoLift switches off automatically after approximately three minutes without activation. To operate the lift, press and hold the UP or DOWN button on the hand control to raise or lower the strap. -
Page 17: Led And Buzzer Functions
Continuous solid 1x/3s seconds, beeping once every three (critical battery level) seconds. These states will remain until Sleep the lift goes back to a sleep state after (if inactive) one minute of inactivity. www.amico.com... -
Page 18: Other Error Codes
Note: Reset can be performed at any time, not just after the 1000th lift. Emergency Stop The GoLift unit also has an Emergency Shut-off feature that allows the operator to shut-off the power to the lift completely in the event of an emergency. By pulling once on the RED emergency lowering cord, located on the underside of the lift, the lift will immediately stop and all its functions will be disabled. -
Page 19: Manual Emergency Lowering
CAUTION: Take great care to ensure that no liquids get inside the Amico GoLift. The lift is not drip proof or water tight. Failure to protect the lift from liquids may result in damage to the lift and may cause personal injury. -
Page 20: Troubleshooting
Troubleshooting Should problems arise with the use of the Amico GoLift, review the following chart. Find the fault and complete the recommended solution. If the fault is not found and or/the solution does not correct the problem contact Amico Mobility. -
Page 21: Amico Service Request Form
Troubleshooting AMICO SERVICE REQUEST FORM For any issues not resolved, please take a video of the issue and send to: AMO-Service@amico.com. Details to Include: Serial Number: ______________________________________________________ Rough Service Life of the Lift: __________________________________________ Error Code (see chart above): __________________________________________... -
Page 22: Labeling The Tracks
All of the lifts come with two track maximum capacity labels inside the box. 3.5” Certified Date: XXXX Track Maximum Capacity: Amico Mobility Solutions Corporation 122-B East Beaver Creek Road 1.877.462.6426 Richmond Hill, ON L4B 1G6, Canada info@amico.com Example Track Label (XXXX = 400/450/700/1000) Before installing the lift in the track system, verify the maximum capacity of the room and the certifying load test. -
Page 23: Inspection And Maintenance
* In accordance to the ISO 10535 Standard “Hoists for the transfer of disabled persons – Requirements and test methods” an inspection should be performed on the GoLift at least once a year. This inspection should be performed by a qualified technician and should include a working load test of one (1) lifting cycle with the maximum load. -
Page 24: Golift Slings
37.4 - 41.3" / 950 - 1049 mm Width 14.2 - 15.8" / 361 - 401 mm 15.4 - 17" / 391 - 432 mm 16.5 - 17.7" / 419 - 450 mm 19 - 20.5" / 483 - 521 mm Amico Mobility Solutions Corporation... -
Page 25: Washing Instructions
GoLift Slings WASHING INSTRUCTIONS: 176°F 80°C Normal washing at Do not bleach Tumble dry low Do not iron Do not dry clean indicated temperature GoTrack Systems and Support Structure GOTRACK CONFIGURATIONS We offer three different track profiles, as well as modular and custom configurations that come in: •... -
Page 26: Environmental Conditions
6100 mm x 67 mm x 146 mm 34.5 kg Environmental Conditions Operation Minimum Maximum Temperature +10°C +40°C Relative atmospheric humidity Air pressure 700 hPa 1060 hPa Transport/Storage Minimum Maximum Temperature -10°C +50°C Relative atmospheric humidity Air pressure 700 hPa 1060 hPa Amico Mobility Solutions Corporation... -
Page 27: References On The Package
Electro-Magnetic Compliance Data for Amico GoLift Guidance and Manufacturer’s Declaration - Electromagnetic Emissions The [EQUIPMENT or SYSTEM] is intended for use in the electromagnetic environment specified below. The customer or the user of the [EQUIPMENT or SYSTEM] should assure that it is used in such an environment. - Page 28 Electro-Magnetic Compliance Data for Amico GoLift Guidance and Manufacturer’s Declaration - Electromagnetic Emissions The [EQUIPMENT or SYSTEM] is intended for use in the electromagnetic environment specified below. The customer or the user of the [EQUIPMENT or SYSTEM] should assure that it is used in such an environment.
- Page 29 Electro-Magnetic Compliance Data for Amico GoLift Guidance and Manufacturer’s Declaration - Electromagnetic Emissions The [EQUIPMENT or SYSTEM] is intended for use in the electromagnetic environment specified below. The customer or the user of the [EQUIPMENT or SYSTEM] should assure that it is used in such an environment.
-
Page 30: Recommended Separation Distances Between Portable And Mobile Rf Communications Equipment And The Equipment Or System
Disposal • The Amico GoLift doesn’t contain any dangerous goods • The components of the Amico GoLift should be properly disposed at the end of its shelf-life • Make sure that the materials are carefully separated • The electrical conducting boards should be submitted to an appropriate recycling proceeding •... -
Page 31: Warranty
The primary purpose of our ceiling lift system is to safely lift, transfer and reposition a patient with as little effort as possible for the caregiver, regardless of the room type. The Amico Mobility Solutions Corporation’s GoLift is easy and safe to use for caregivers as well as patients. - Page 32 Amico Mobility Solutions Corporation | 122-B East Beaver Creek Road, Richmond Hill, ON L4B 1G6, Canada 600 Prime Place, Hauppauge, NY 11788, USA Toll Free Phone: 1.877.462.6426 | Toll Free Fax: 1.866.440.4986 | Tel: 905.764.0800 | Fax: 905.764.0862 Email: amo-service@amico.com | www.amico.com...
Need help?
Do you have a question about the GoLift and is the answer not in the manual?
Questions and answers
The amico go lift blinks green continuously when in use - is this normal
No, it is not normal for the Amico GoLift to blink green continuously when in use. A blinking green LED (2 times per second) indicates a maintenance alarm, which occurs after 1,001 lifts.
This answer is automatically generated
stoped at ceiling won't come down
The Amico GoLift may not come down after stopping at the ceiling due to drained or expired batteries. Replacing or fully charging the batteries may resolve the issue. If the problem continues, a video should be taken and sent to the service team along with the lift's serial number and error code.
This answer is automatically generated